Abstract:CsPbIBr 2 perovskite has been considered as a promising candidate for the light-harvesting material of perovskite solar cells (PSCs) due to its acceptable band gap and high stability. Nevertheless, the efficiency of CsPbIBr 2 -based PSC still lags behind that of its homologs and is far away from the theoretical value. This can be attributed to the poor quality of CsPbIBr 2 perovskite film. Therefore, it is highly desirable to improve the quality of CsPbIBr 2 perovskite film for enhancing the photovoltaic performance of CsPbIBr 2 PSCs. In this work, cellulose acetate (CA) is used as a polymer additive that is introduced into CsPbIBr 2 precursor solution for improving the quality of CsPbIBr 2 perovskite film via controlling crystallization process. The interaction between the C=O group of CA and Pb 2+ in the precursor solution and the enhanced viscosity of precursor solution induced by CA addition reduce the crystallization rate of CsPbIBr 2 perovskite. As a result, a compact CsPbIBr 2 perovskite film with high crystallinity, large grain size, and low density of defect is prepared. The remarkably improved quality of CsPbIBr 2 perovskite film upon CA addition can be attributed to the relatively slow crystallization rate. The slow crystallization rate allows the perovskite film to have enough time to form perfect perovskite crystal structure with large-size crystal grain and low density of defects. Furthermore, the oxygen functional groups of CA can passivate the undercoordinated Pb 2+ , which effectively suppresses the defects and traps induced by Pb 2+ in CsPbIBr 2 perovskite film. The stability of CsPbIBr 2 perovskite film is also greatly improved by CA addition. The added CA does not participate into the CsPbIBr 2 perovskite crystal but distributes at the grain boundaries and, or, interfaces area and forms a moisture barrier around perovskite grains, which obviously enhances the stability of CsPbIBr 2 perovskite film in the ambient air. The carbon-based CsPbIBr 2 perovskite solar cells with a configuration of FTO/TiO 2 /perovskite film/ carbon are fabricated by using the carbon layer as both the hole-transport layer and the back electrode. Under the illumination of 100 mW/cm 2 , the PSC based on CA-CsPbIBr 2 perovskite film delivers a high conversion efficiency of 7.52%, which is increased by 40% compared with the efficiency of the device based on the pure CsPbIBr 2 perovskite film. In addition, the PSC based on CA-CsPbIBr 2 perovskite film shows a hysteresis index (HI) of 7%, while the device based on pure CsPbIBr 2 film displays a higher HI of 22%. This result demonstrates that the CA addition can effectively suppress the hysteresis effect of inorganic PSCs. The stability of the PSC based on CA-CsPbIBr 2 perovskite film is investigated by tracking the variation of the efficiency with time in the ambient condition. The fabricated PSCs without any encapsulation are stored in the air. The photovoltaic performance is measured once a day. The efficiency of the PSC based on CA-CsPbIBr 2 perovskite remains more than 90% of its initial value after being stored in the air for 800 h, showing an excellent long-term stability. Therefore, this work provides a facile and effective method of improving the quality of CsPbIBr 2 perovskite films, which is expected to be helpful in developing high-efficiency and stable carbon-based inorganic PSCs.

Managing Pb‐Related Imperfections via Rationally Designed Aniline Derivative with Bilateral Cyano and Acetyl Groups as Lewis Base for High‐Efficiency Perovskite Solar Cells Exceeding 24%

Lead (Pb) Management in the Entire Life Cycle of Highly Efficient and Stable Perovskite Solar Cells

Selective Chemical Etching to Remove 0D Cs4Pb(IBr)6 from Mixed‐Dimensional Perovskite Surface Achieving High Efficiency Flexible All‐Inorganic Perovskite Solar Cells with Superior Mechanical Durability

Managing Multiple Halide-Related Defects for Efficient and Stable Inorganic Perovskite Solar Cells

Illumination Enhanced Crystallization and Defect Passivation for High Performance CsPbI3 Perovskite Solar Cells by Sacrificing Dye

A Bilateral Cyano Molecule Serving As an Effective Additive Enables High-Efficiency and Stable Perovskite Solar Cells

Surface-Bulk-Passivated Perovskite Films Via 2-Thiophenemethylammonium Bromide and Pbbr2 for Air-Processed Perovskite Solar Cells with High-Stability

Surface Defects Management by In Situ Etching with Methanol for Efficient Inverted Inorganic Perovskite Solar Cells

High Efficiency Quasi‐2D/3D Pb–Ba Perovskite Solar Cells via Phenethylammonium Chloride Addition

4-biphenylcarboxylic acid as defect passivation for high-efficient perovskite solar cells

Enhanced Indoor Perovskite Solar Cells: Mitigating Interface Defects and Charge Transport Losses with Polyarene‐Based Hole‐Selective Layers

Enhancing the performance of perovskite solar cells through simple bilateral active site molecule assisted surface defect passivation

Synchronous Surface Reconstruction and Defect Passivation for High-Performance Inorganic Perovskite Solar Cells.

Synergistic Effect of Defects Passivation and Energy Level Alignment Realizing P3HT‐Based High‐Efficiency CsPbI3 Perovskite Solar Cells

Reconstructing the Amorphous and Defective Surface for Efficient and Stable Perovskite Solar Cells

Defect control based on interfacial passivation via post-treatment of 1-ethylpyridine hydrobromide for achieving efficient and stable perovskite solar cells

Stable perovskite solar cells with 25.17% efficiency enabled by improving crystallization and passivating defects synergistically

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Critical Role of Post-Treatment Induced Surface Reconstruction for High Performance Inorganic Tin-Lead Perovskite Solar Cells

Enhancing Quality of CsPbIBr2 Inorganic Perovskite Via Cellulose Acetate Addition for High-Performance Perovskite Solar Cells

Synergetic Excess PbI2 and Reduced Pb Leakage Management Strategy for 24.28% Efficient, Stable and Eco‐Friendly Perovskite Solar Cells