Abstract:Despite recent advances in leak detection in water supply systems, previous studies focused mainly on material aspects or orifice opening characteristics. This study evaluated geometric, hydraulic, and hydrodynamic factors influencing on water leaks using three-dimensional (3D) computational fluid dynamics (CFD) simulations. The simulated discharge coefficient (C-d) had a maximum absolute deviation of 8% compared with experimental data. The results indicated that the variation of C-d as a function of the diameter and orifice size can be attributed to the effect of tube curvature on flow convergence through the orifice. The statistical analysis concluded that the orifice-to-pipe diameter ratio d/D is the best dimensionless parameter that explains this phenomenon, which agreed with the analyses of the streamlines and turbulent eddy dissipation rate in the simulations. Other important dimensionless parameter are the ratio of the pressure head differential at the orifice to the pipe diameter Delta H/D, Reynolds number (R), and the ratio of the pressure head differential at the orifice to the wall thickness Delta H/e, in order of relevance. A set of empirical correlations was elaborated through a nonlinear multiple regression analysis with Reynolds numbers ranging between 12,000 and 52,000, and pressure head differential ranging from 1 to 45 m. This study advances the knowledge of cross-flows through orifices, and the proposed correlations potentially can improve the prediction of water leaks in pipes. (c) 2023 American Society of Civil Engineers. Practical Applications: This study demonstrates the applicability of computational fluid dynamics simulations for understanding the leakage phenomenon in pipes, and obtained a set of empirical correlations that potentially can improve the prediction of leakages in water distribution systems. The authors propose an equation for estimating the discharge coefficient in practical applications. This equation balances the number of terms (three dimensionless coefficients) and accuracy (R-2 = 98%). Although it is dimensionless, the correlation must be used within the established ranges of values to ensure its effectiveness: Reynolds numbers from 12,000 to 52,000, and pressure head differentials from 1 to 45 m.

Discharge Coefficients for Thin Restriction Orifices Based on the Homogeneous Direct Integration Method

Frictional Resistance Investigation of Sco2 and a Semi-Empirical Friction Factor Correlation Based on Wall-of-the-law

Computational Simulation of the Flow Induced by Water Leaks in Pipes

A Numerical Method for Solution of the Discharge Coefficients in Externally Pressurized Gas Bearings with Inherent Orifice Restrictors

Numerical prediction of transient discharge coefficient in orifice flow meter

Experimental and numerical modeling of sidewall orifices

Experimental study on discharge coefficient of a cylindrical hole with gas jets in liquid crossflow

Correction and laboratory investigation for energy loss coefficient of square-edged orifice plate

An Experimental Study on the Force Coefficient and the Discharge Coefficient of a Safety Valve in Air-water Mixture Flow

Impact of Orifice-to-Pipe Diameter Ratio on Leakage Flow: An Experimental Study

ICONE19-43330 DISCHARGE COEFFICIENT ANALYSIS OF PERFORATED ORIFICE PLATES

Hydrothermal performance and irreversibility production of distilled H2O flowing in outwardly-corrugated converging pipes

An Experiment Study of Pressure Drop and Flow Distribution in Subchannels of a 37-Pin Wire-Wrapped Rod Bundle

Frictional resistance investigation of sCO 2 and a semi-empirical friction factor correlation based on wall-of-the-law

Numerical Investigation on Mass Transfer Enhancement Downstream of an Orifice

Assessment of existing two phase heat transfer coefficient and critical heat flux correlations for cryogenic flow boiling in pipe quenching experiments

Void Fraction Measurement of Gas-Liquid Two-Phase Flow Based on C4D Technique

Numerical Predictions of Uniform CO2 Corrosion in Complex Fluid Domains Using Low Reynolds Number Models

Head loss coefficient of orifice plate energy dissipator

Analytical methodology for calculating discharge coefficients of critical flow nozzles for high-pressure hydrogen

Predictions of Heat Transfer Coefficients and Pressure Drops to Supercritical Pressure Hcfc22 Flowing in A Small Tube