Abstract:Soil fugitive dust pollution caused by urban construction sites is a significant problem. To improve the dust suppression efficiency on the urban construction sites, hydroxypropyl guar (HPG), dodecyl dimethyl amine oxide (OB-2), and hydroxypropyl methylcellulose (HPMC) were selected as individual components of the composite dust suppressant using a single-factor test. The response surface methodology (RSM) was used to determine the optimal mixing proportions. After preparation, the characteristics of the composite dust suppressant were tested. Fourier-transform infrared spectroscopy and scanning electron microscopy (SEM) were used to characterize the composite dust suppressant and explore its mechanism. The results showed that 0.327% HPG, 0.6% OB-2, and 0.5% HPMC were the best compound concentrations. Under optimum conditions, the viscosity of the composite dust suppressant was 151.1 , penetration time was 61.4 s, and water retention rate was 30.67%. Compared with traditional dust control by spraying water, it showed better resistance to evaporation at high temperatures and better wind erosion resistance. The antievaporation rate was 39.42% at 60 °C. After 11 d of continuous wind erosion at level 7, the wind erosion resistance rate was as high as 98.24%. The reason for the excellent dust suppression effect of the composite dust suppressant is that the methyl and hydroxyl groups in the solution diffuse to the surface of the soil fugitive dust particles using Brownian motion and gradually approach the corresponding groups in the soil fugitive dust particles. When the distance between the two reaches 10 , adsorption occurs, causing small dust particles to stick together. Because of the stability of the covalent bonds in the methyl and hydroxyl groups, a stable solidified layer is formed on the soil fugitive dust surface after the evaporation of the composite dust inhibitor solution, thereby avoiding secondary dust. In addition, the composite dust suppressant is noncorrosive and friendly to the construction site environment. Therefore, the composite dust suppressant can effectively reduce soil fugitive dust, alleviate environmental pollution, and provide a reference for preventing and controlling soil fugitive dust on urban construction sites and preparing composite environment-friendly dust suppressants.

Development and characterization of a γ-PGA/PVA/SDBS cross-linked network foam for dust suppression in tunneling construction

Preparation and performance of starch-based cross-linked network structured dust suppression foams for complex climatic conditions

Modified sodium alginate-based three-dimensional network hydrogel dust suppressant: Preparation, characterization, and performance

Preparation and performance characterization of a new dust suppressant with a cross-linked network structure for use in open-pit coal mines

Synthesis and performance determination of a glycosylated modified covalent polymer dust suppressant

A hygroscopic dual-porous road dust suppressant with good dust suppression prepared by the freeze-thawing method

Optimal Preparation and Performance Study of Eco-Friendly Composite Chemical Dust Suppressants: A Case Study in a Construction Site in Chengdu

Study on characteristics and microscopic mechanism of composite environment-friendly dust suppressant for urban construction site soil fugitive dust based on response surface methodology optimization

Experimental study on improving salt resistance of dust suppressing foam with polymers

Development of an eco-friendly dust suppressant based on modified pectin: experimental and theoretical investigations

Study on synthesis of environmentally-friendly polymer dust suppressant based on graft modification

Experimental study on ratio optimization and application of improved bonded dust suppressant based on wetting effect

Preparation and characterization of modified dual network dust suppression gel based on sodium alginate and soluble starch

Synthesis and performance study of biomass-based suppressant and its application in radioactive aerosol sedimentation

The Sex-Related Difference in Perfluorooctanoate Excretion in the Rat 1

A green, environment-friendly, high-consolidation-strength composite dust suppressant derived from xanthan gum

Preparation and properties of modified starch-based low viscosity and high consolidation foam dust suppressant

Synthesis of reticular long-carbon-chain polysiloxane and its hydrophobic modification of phosphogypsum-based materials

Preparation and performance evaluation of modified soy protein isolate polymeric dust suppressant using graft copolymerization

Local concentration of gel phase domains in supported lipid bilayers under light irradiation in binary mixture of phospholipids doped with dyes for photoinduced activation.

Wetting-consolidation type dust suppressant based on sugarcane bagasse as an environmental material: Preparation, characterization and dust suppression mechanism