Abstract:Polylactic acid (PLA) has been widely used as filaments for material extrusion additive manufacturing (AM) to develop patient-specific scaffolds in bone tissue engineering. Hydroxyapatite (HA), a major component of natural bone, has been extensively recognized as an osteoconductive biomolecule. Here, inspired by the mussel-adhesive phenomenon, in this study, polydopamine (PDA) coating was applied to the surface of 3D printed PLA scaffolds (PLA@PDA), acting as a versatile adhesive platform for immobilizing HA nanoparticles (nHA). Comprehensive analyses were performed to understand the physicochemical properties of the 3D-printed PLA scaffold functionalized with nHA and PDA for their potent clinical application as a bone regenerative substitute. Scanning electron microscopy (SEM) and element dispersive X-ray (EDX) confirmed a successful loading of nHA particles on the surface of PLA@PDA after 3 and 7 days of coating (PLA@PDA-HA3 and PLA@PDA-HA7), while the surface micromorphology and porosity remain unchanged after surface modification. The thermogravimetric analysis (TGA) showed that 7.7 % and 12.3% mass ratio of nHA were loaded on the PLA scaffold surface, respectively. The wettability test indicated that the hydrophilicity of nHA-coated scaffolds was greatly enhanced, while the mechanical properties remained uncompromised. The 3D laser scanning confocal microscope (3DLS) images revealed that the surface roughness was significantly increased, reaching Sa (arithmetic mean height) of 0.402 μm in PLA@PDA-HA7. Twenty-eight days of in-vitro degradation results showed that the introduction of nHA to the PLA surface enhances its degradation properties, as evidenced by the SEM images and weight loss test. Furthermore, a sustainable release of Ca 2+ from PLA@PDA-HA3 and PLA@PDA-HA7 was recorded, during the degradation process. In contrast, the released hydroxyl group of nHA tends to neutralize the local acidic environments, which was more conducive to osteoblastic differentiation and extracellular mineralization. Taken together, this facile surface modification provides 3D printed PLA scaffolds with effective bone regenerative properties by depositing Ca 2+ contents, improving surface hydrophilicity, and enhancing the in-vitro degradation rate.

Polylactic acid-nanocrystalline carbonated hydroxyapatite (PLA-cHAP) composite: preparation and surface topographical structuring with direct laser writing (DLW)

A Surface Modification of Polylactic Acid Composites for Additive Manufacturing with Modified Chopped Carbon Fiber and Modified Nano‐hydroxyapatite

Phosphonic Acid Coupling Agent Modification of HAP Nanoparticles: Interfacial Effects in PLLA/HAP Bone Scaffold

Preparation and characterization of a novel polylactic acid/hydroxyapatite composite scaffold with biomimetic micro-nanofibrous porous structure

Synthesis and Characterization of PLA-Micro-structured Hydroxyapatite Composite Films

Surface modification of hydroxyapatite and its influences on the properties of poly(lactic acid)-based porous scaffolds

The Deposition of Hydroxyapatite Particles Within an Organic Matrix on the Surface of Poly(lactic acid)

Biomimetic, mussel-inspired surface modification of 3D-printed biodegradable polylactic acid scaffolds with nano-hydroxyapatite for bone tissue engineering

Design of femtosecond microstructured poly lactic acid temporal scaffolds coated with hydroxyapatite by pulse laser deposition method for bone tissue regeneration

Numerical Calculation and Properties Study on Polylactic Acid (Pla)/nano-Hydroxyapatite (N-Ha) Composite Fluid 3D Printed by Fused Deposition Modeling

Powder Loading Effects on the Physicochemical and Mechanical Properties of 3D Printed Poly Lactic Acid/Hydroxyapatite Biocomposites

Sol-Gel Synthesis and Characterisation of Nano-sized Hydroxyapatite Powders and Hydroxyapatite/ Poly(D,L-lactide-co-glycolide) Composite Scaffolds

Synthesis of Carbonated Hydroxyapatite Nanospheres Through Nanoemulsion

Effect of Filler Content on the Morphology and Physical Properties of Poly(Lactic Acid)-Hydroxyapatite Composites

Characterization, Thermal and Biological Properties of PCL/PLA/PEG/N-HA Composites

In situ growth of hydroxyapatite within electrospun poly(DL-lactide) fibers.

Preparation, characterization and cytocompatibility of porous ACP/PLLA composites.

Preparation, Dynamic Rheological Behavior, Crystallization, and Mechanical Properties of Inorganic Whiskers Reinforced Polylactic Acid/hydroxyapatite Nanocomposites

Improve the Strength of Pla/Ha Composite Through the Use of Surface Initiated Polymerization and Phosphonic Acid Coupling Agent

Biomimetic Hierarchical Structuring of PLA by Ultra-Short Laser Pulses for Processing of Tissue Engineered Matrices: Study of Cellular and Antibacterial Behavior

Structural, mechanical, and in-vitro characterization of hydroxyapatite loaded PLA composites