Abstract:This study addresses the challenges of non-stationarity and significant background noise interference in eddy current detection signals by proposing a noise reduction method based on Improved Complete Ensemble Empirical Mode Decomposition with Adapted Noise (ICEEMDAN). The process commences with the signal being decomposed using Improved Complete Ensemble Empirical Mode Decomposition with Adapted Noise into a finite number of Intrinsic Mode Functions (IMFs). Each Intrinsic Mode Function is then evaluated for the presence of high-frequency noise using a Power Spectral Density (PSD) analysis. The high-frequency noise present in the Intrinsic Mode Functions is then reduced using Normalized Least Mean Squares (NLMS) before being reconstructed with the remaining Intrinsic Mode Functions. Subsequently, the reconstructed signals are subjected to another round of decomposition using Improved Complete Ensemble Empirical Mode Decomposition with Adapted Noise. The Pearson Product Moment Correlation Coefficient (PPMCC) is utilised to calculate the correlation between the Intrinsic Mode Functions within each layer, retaining those with a strong correlation to further attenuate noise. Ultimately, the local maxima judgement method selectively amplifies defect signals by assessing changes in peak and valley degrees, thereby improving the signal-to-noise ratio of the eddy current detection signal. The experimental results demonstrate that, in comparison to the use of only the conventional Improved Complete Ensemble Empirical Mode Decomposition with Adapted Noise and Normalized Least Mean Squares denoising methods, the proposed method increases the Signal-to-Noise Ratio (SNR) by 1.08 dB and 2.31 dB, respectively, and decreases the Mean Square Error (MSE) by 106.9 and 223.9, respectively. The false alarm rate for stainless steel welded tubes with defects is 1.4%, while the false alarm rate for stainless steel welded tubes without defects is 0.4%.

Investigating Electromagnetic Acoustic Emission Signals Denoising for Alloy Materials Nondestructive Testing: A CRQA Method

Adaptive Wavelet Thresholding Based Ultrasonic Signal Denoising

Analysis and Denoising of Electric Noise in Phased Array Ultrasonic Testing System

Study of Acoustic Emission Signal Noise Attenuation Based on Unsupervised Skip Neural Network

Research on Ultrasonic Nondestructive Testing Algorithm for Metal Materials

Acoustic emission signal-based non-destructive testing of carbon content of Pr-Nd alloys

A Study of Electromagnetic Acoustic Emission Technology in Non-destructive Testing

Research on a Noise Reduction Method Based on Multi-Resolution Singular Value Decomposition

Research on Denoising in Acoustic Emission Signals Based on Independent Component Analysis

Investigation on Damage Evolution and Acoustic Emission Behavior of Aluminum Alloy Sheet During Blanking Process

A denoising algorithm for an electromagnetic acoustic transducer (EMAT) signal by envelope regulation

Research on signal denoising algorithm based on ICEEMDAN eddy current detection

A New Method to Evaluate Surface Defects with an Electromagnetic Acoustic Transducer

Research on the De-noising Algorithm of Strong Noises in the EMAT System

Application of Multivariate Acoustic Emission Parameters in Damage Monitoring and Assessment of a Low-Alloyed Steel

Noise Reduction Based on Improved Variational Mode Decomposition for Acoustic Emission Signal of Coal Failure

Rail Crack Detection Using Optimal Local Mean Decomposition and Cepstral Information Coefficient Based on Electromagnetic Acoustic Emission Technology

Enhanced concrete crack detection using nonlinear ultrasonic signal denoising and feature enhancement with CEEMDAN, VMD and GRU

Correlation Between Acoustic Emission Detection and Microstructural Characterization for Damage Evolution

Acoustic Emission Denoising Based on Bio-inspired Antlion Optimization: A Novel Technique for Structural Health Monitoring

An Investigation on Acoustic Emission Detection of Rail Crack in Actual Application by Chaos Theory with Improved Feature Detection Method