Dishwasher improvement at ASKO - Developing a simplified test method to determine the influence of spray arm speed and pressure

Xiang Zhang,Peter Tsouknidas

Abstract:This thesis report describes how a dishwasher was modified and used as a test rig together with a new test method to find the relation between cleaning performance and the rotation speed of the spray arms as well as the water pressure. All tests were conducted using an ASKO D5900 dishwasher. First off, the tests were planned in detail. To ensure that the tests would be reliable and not overly redundant proper Design of Experiments methods were used. A simplified test method was developed that would be easier and faster to use than the standard tests currently used by dishwasher developers. When the test rig was to be built several concepts for changing rotation speed and water pressure were generated through brainstorming sessions and the use of morphological matrices based on system design thinking. Kesselring matrices were used during the final selection. The selected concepts were further developed to suit an actual implementation in the dishwasher. The test rig was built and used to implement the cleaning performance test. Several pre-tests were conducted to evaluate the test method and data analysis method. The first test was implemented and showed a trend of relation between cleaning performance and rotation speed and pressure. Performance increased as the rotation speed decreased and the pressure increased, but due to large deviations the results were not found to be reliable. The deviation of the results was too large to be conclusive by statistical standards. This was the reason for a second test implementation where influencing variables like time and temperature were more accurately controlled. Stable results were acquired during the second test, which supported the results from the first test. The prototype was then tested using European standard dishwasher test methods to determine the external validity of the test method at ASKOs facilities in Vara. Sound tests were also conducted. Finally, some tests were done at a higher pressure level using a stronger pump in order to see if the trend was continuing at even higher pressure levels. The test results showed that performance increases with higher water pressure and lower rotation speed. The cost of higher pressure is an increasing sound level. The test method proved to be reliable.

Computer Science,Engineering