Abstract:Application of biochar to enhance mechanical properties, thermal stability, and dimensional stability of wood‐plastic composites. In this study, three types of biochar including wood biochar (WB), rice husk biochar (RHB), and bamboo biochar (BB) were used as fillers to mix with wood flour (WF), polypropylene (PP), and maleic anhydride polypropylene (MAPP) to prepare wood polymer biochar composites (WPBC). The influences of biochar types and addition amounts (10 wt%, 20 wt%, 30 wt%, and 40 wt%) on the mechanical properties, dimension stability, and thermal stability of WPBC were investigated. The results showed that the water absorption rate and thickness swelling rate of WPBC were lower than control group due to the hydrophobic nature of the biochar. Additionally, the presence of biochar was beneficial to the interfacial bonding and stress transmission in composites, resulting in better mechanical properties. Composites containing 20 wt% RHB showed the highest flexural modulus among all, which increased by 11.27% compared to control group. Adding WB also enhanced the tensile and impact strength of composites at a loading level of 10 wt%, with the value of 39.10 MPa and 15.55 KJ/m2, respectively. The thermal stability and flame retardancy of WPBC was improved due to the presence of SiO2 in biochar, which could hinder heat transmission and thermal degradation during combustion process. Concurrently, the rate of heat release and smoke generation in WPBC also decreased significantly. The oxygen limiting index (LOI) of composites with 20 wt% RHB was as high as 26.64%, increasing by 30.14% compared to control group. The results suggested that biochar was a promising alternative to commercial additives for the cost‐effective production of composites. Highlights Effects of biochar loading level and type were compared. Enhanced the mechanical properties by optimizing interfacial bonding. Biochar improved the dimensional and thermal stability. Biochar is a versatile and cost‐effective additive.

Nucleating and reinforcing effects of nanobiochar on poly(3-hydroxybutyrate-co-3-hydroxhexanoate) bionanocomposites

Effects of Bamboo Cellulose Nanowhisker Content on the Morphology, Crystallization, Mechanical, and Thermal Properties of PLA Matrix Biocomposites

Poly(Lactic Acid) Biocomposites Reinforced With Ultrafine Bamboo-Char: Morphology, Mechanical, Thermal, And Water Absorption Properties

Conversion from Bamboo Waste Derived Biochar to Cleaner Composites: Synergistic Effects of Aramid Fiber and Silica

High-toughness PLA/Bamboo Cellulose Nanowhiskers Bionanocomposite, Strengthened with Silylated Ultrafine Bamboo-Char

Mechanical and thermal properties of poly(butylene succinate)/plant fiber biodegradable composite

Intumescent-Grafted Bamboo Charcoal: A Natural Nontoxic Fire-Retardant Filler for Polylactic Acid (PLA) Composites

Natural Biodegradable Poly(3-hydroxybutyrate- co -3-hydroxyvalerate) Nanocomposites with Multifunctional Cellulose Nanocrystals/Graphene Oxide Hybrids for High-Performance Food Packaging.

Versatile biochar for wood‐plastic composites: Improving mechanical properties, dimensional and thermal stability

Effect of different amounts of bamboo charcoal on properties of biodegradable bamboo charcoal/polylactic acid composites

Biochar from Digestate Pyrolysis as a Filler for Biopolymer Blends: Effect of Blend Composition

Bio‐composite using polyhydroxyalkanoates and sustainable nanofillers derived from cellulose nanofibers and its application for an environmentally friendly packaging material

Biopolymer nanocomposite blends of poly(lactic acid) and polyhydroxybutyrate biopolymers reinforced with cellulose nanofibrils at low loading ratio

Biodegradable Poly(butylene adipate- co -terephthalate) Nanocomposites Reinforced with In Situ Fibrillated Nanocelluloses

Study on the poly(3-hydroxybutyrate-co-4-hydroxybutyrate)-based nanocomposites reinforced by surface modified nanocrystalline cellulose

Green Bionanocomposites Based on Polyhydroxybutyrate and Filled with Cellulose Nanocrystals: Melting Processing and Characterization

Wood Residue-Derived Biochar as a Low-Cost, Lubricating Filler in Poly(butylene succinate-co-adipate) Biocomposites

Fabrication of Phytic Acid/Urea Co-Modified Bamboo Biochar and Its Application as Green Flame Retardant for Polylactic Acid Resins

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Bionanocomposites with Crystalline Nanocellulose and Graphene Oxide: Experimental Results and Support Vector Machine Modeling

A bionanocomposite based on cellulose nanofibers modified by a sustainable heterocyclic dispersing agent with outstanding mechanical properties

Effect of Biochar Addition on Mechanical Properties, Thermal Stability, and Water Resistance of Hemp-Polylactic Acid (PLA) Composites