First measurements of an imaging heavy ion beam probe at the ASDEX Upgrade tokamak
J. Galdon-Quiroga,G. Birkenmeier,P. Oyola,H. Lindl,A. Rodriguez-Gonzalez,G. Anda,M. Garcia-Munoz,A. Herrmann,J. Kalis,K. Kaunert,T. Lunt,D. Refy,V. Rohde,J. Rueda-Rueda,M. Sochor,B. Tal,M. Teschke,M. Videla,E. Viezzer,S. Zoletnik,ASDEX Upgrade Team,
DOI: https://doi.org/10.1063/5.0175720
IF: 1.6
2024-01-01
Review of Scientific Instruments
Abstract:The imaging heavy ion beam probe (i-HIBP) diagnostic has been successfully commissioned at ASDEX Upgrade. The i-HIBP injects a primary neutral beam into the plasma, where it is ionized, leading to a fan of secondary (charged) beams. These are deflected by the magnetic field of the tokamak and collected by a scintillator detector, generating a strike-line light pattern that encodes information on the density, electrostatic potential, and magnetic field of the plasma edge. The first measurements have been made, demonstrating the proof-of-principle of this diagnostic technique. A primary beam of 85/87Rb has been used with energies ranging between 60 and 72 keV and extracted currents up to 1.5 mA. The first signals have been obtained in experiments covering a wide range of parameter spaces, with plasma currents (Ip) between 0.2 and 0.8 MA and on-axis toroidal magnetic field (Bt) between 1.9 and 2.7 T. Low densities appear to be critical for the performance of the diagnostic, as signals are typically observed only when the line integrated density is below 2.0–3.0 × 1019 m−2 in the central interferometer chord, depending on the plasma shape. The strike line moves as expected when Ip is ramped, indicating that current measurements are possible. Additionally, clear dynamics in the intensity of the strike line are often observed, which might be linked to changes in the edge profile structure. However, the signal-to-background ratio of the signals is hampered by stray light, and the image guide degradation is due to neutron irradiation. Finally, simulations have been carried out to investigate the sensitivity of the expected signals to plasma density and temperature. The results are in qualitative agreement with the experimental observations, suggesting that the diagnostic is almost insensitive to fluctuations in the temperature profile, while the signal level is highly determined by the density profile due to the beam attenuation.
instruments & instrumentation,physics, applied