Abstract:An integrated plasma profile control strategy, ARTAEMIS, is being developed for extrapolating present-day advanced tokamak (AT) scenarios to steady-state operation. The approach is based on semi-empirical modelling and was initially explored on JET (Moreau et al 2008 Nucl. Fusion 48 106001). This paper deals with the general applicability of this strategy for simultaneous magnetic and kinetic control on various tokamaks. The determination of the device-specific, control-oriented models that are needed to compute optimal controller matrices for a given operation scenario is discussed. The methodology is generic and can be applied to any device, with different sets of heating and current drive actuators, controlled variables and profiles. The system identification algorithms take advantage of the large ratio between the magnetic and thermal diffusion time scales and have been recently applied to both JT-60U and DIII-D data. On JT-60U, an existing series of high bootstrap current (∼70%), 0.9 MA non-inductive AT discharges was used. The actuators consisted of four groups of neutral beam injectors aimed at perpendicular injection (on-axis and off-axis), and co-current tangential injection (also on-axis and off-axis). On DIII-D, dedicated system identification experiments were carried out in the loop voltage (V ext) control mode (as opposed to current control) to avoid feedback in the response data from the primary circuit. The reference plasma state was that of a 0.9 MA AT scenario which had been optimized to combine non-inductive current fractions near unity with 3.5 < βN < 3.9, bootstrap current fractions larger than 65% and H 98(y,2) = 1.5. Actuators other than V ext were co-current, counter-current and balanced neutral beam injection, and electron cyclotron current drive. Power and loop voltage modulations resulted in dynamic variations of the plasma current between 0.7 and 1.2 MA. It is concluded that the response of essential plasma parameter profiles to specific actuators of a given device can be satisfactorily identified from a small set of experiments. This provides, for control purposes, a readily available alternative to first-principles plasma modelling.

Inter-discharge optimization for fast, reliable access to ASDEX Upgrade advanced tokamak scenario

Plasma Models for Real-Time Control of Advanced Tokamak Scenarios

Data-Driven Modeling and Feedback Tracking Control of the Toroidal Rotation Profile for Advanced Tokamak Scenarios in Diii-D

Dynamic Optimization Of Tokamak Plasmas Via Control Parameterization And The Time-Scaling Transformation

Towards Model-Based Current Profile Control at DIII-D

Dynamic Optimization of Open-Loop Input Signals for Ramp-Up Current Profiles in Tokamak Plasmas

Rapid optimization of stationary tokamak plasmas in RAPTOR: demonstration for the ITER hybrid scenario with neural network surrogate transport model QLKNN

Receding-horizon optimal control of the current profile evolution during the ramp-up phase of a tokamak discharge

Development and application of a predictive model for advanced tokamak scenario design

Non-linear shattered pellet injection modelling in ASDEX Upgrade

Overview of advances in ASDEX Upgrade plasma control to support critical physics research for ITER and beyond

Overview of ASDEX Upgrade results in view of ITER and DEMO

Impact of divertor neutral pressure on confinement degradation of advanced tokamak scenarios at ASDEX Upgrade

ASCOT orbit-following simulations of ion cyclotron heating with synthetic fast ion loss diagnostic: a first application to ASDEX Upgrade

Characterisation of the Fast-Ion Edge Resonant Transport Layer Induced by 3D Perturbative Fields in the ASDEX Upgrade Tokamak Through Full Orbit Simulations

Magnetics only real-time equilibrium reconstruction on ASDEX Upgrade

Flux-driven integrated modelling of main ion pressure and trace tungsten transport in ASDEX Upgrade

MHD simulations of small ELMs at low triangularity in ASDEX Upgrade

Tokamak edge-SOL turbulence in H-mode conditions simulated with a global, electromagnetic, transcollisional drift-fluid model

Self-consistent modeling of runaway electron generation in massive gas injection scenarios in ASDEX Upgrade

Non-linear MHD modelling of transients in tokamaks: A review of recent advances with the JOREK code