Additive manufacturing of silica aerogels

Shanyu Zhao,Gilberto Siqueira,Sarka Drdova,David Norris,Christopher Ubert,Anne Bonnin,Sandra Galmarini,Michal Ganobjak,Zhengyuan Pan,Samuel Brunner,Gustav Nyström,Jing Wang,Matthias M. Koebel,Wim J. Malfait

DOI: https://doi.org/10.1038/s41586-020-2594-0

IF: 64.8

2020-08-19

Nature

Abstract:Owing to their ultralow thermal conductivity and open pore structure^{<a href="#ref-CR1">1</a>,<a href="#ref-CR2">2</a>,<a href="/articles/s41586-020-2594-0#ref-CR3">3</a>}, silica aerogels are widely used in thermal insulation^{<a href="/articles/s41586-020-2594-0#ref-CR4">4</a>,<a href="/articles/s41586-020-2594-0#ref-CR5">5</a>}, catalysis^{<a href="/articles/s41586-020-2594-0#ref-CR6">6</a>}, physics^{<a href="/articles/s41586-020-2594-0#ref-CR7">7</a>,<a href="/articles/s41586-020-2594-0#ref-CR8">8</a>}, environmental remediation^{<a href="/articles/s41586-020-2594-0#ref-CR6">6</a>,<a href="/articles/s41586-020-2594-0#ref-CR9">9</a>}, optical devices^{<a href="/articles/s41586-020-2594-0#ref-CR10">10</a>} and hypervelocity particle capture^{<a href="/articles/s41586-020-2594-0#ref-CR11">11</a>}. Thermal insulation is by far the largest market for silica aerogels, which are ideal materials when space is limited. One drawback of silica aerogels is their brittleness. Fibre reinforcement and binders can be used to overcome this for large-volume applications in building and industrial insulation^{<a href="/articles/s41586-020-2594-0#ref-CR5">5</a>,<a href="/articles/s41586-020-2594-0#ref-CR12">12</a>}, but their poor machinability, combined with the difficulty of precisely casting small objects, limits the miniaturization potential of silica aerogels. Additive manufacturing provides an alternative route to miniaturization, but was "considered not feasible for silica aerogel"^{<a href="/articles/s41586-020-2594-0#ref-CR13">13</a>}. Here we present a direct ink writing protocol to create miniaturized silica aerogel objects from a slurry of silica aerogel powder in a dilute silica nanoparticle suspension (sol). The inks exhibit shear-thinning behaviour, owing to the high volume fraction of gel particles. As a result, they flow easily through the nozzle during printing, but their viscosity increases rapidly after printing, ensuring that the printed objects retain their shape. After printing, the silica sol is gelled in an ammonia atmosphere to enable subsequent processing into aerogels. The printed aerogel objects are pure silica and retain the high specific surface area (751 square metres per gram) and ultralow thermal conductivity (15.9 milliwatts per metre per kelvin) typical of silica aerogels. Furthermore, we demonstrate the ease with which functional nanoparticles can be incorporated. The printed silica aerogel objects can be used for thermal management, as miniaturized gas pumps and to degrade volatile organic compounds, illustrating the potential of our protocol.

multidisciplinary sciences

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a feasible 3D printing technology for manufacturing tiny pure silica aerogel objects. Specifically, the researchers hope to overcome the difficulties encountered in traditional processing methods, such as the brittleness of the material, the difficulty in precise casting, and poor machinability, so as to realize the application of silica aerogel on the micro - scale.

Silica aerogel has wide applications in fields such as heat insulation, catalysis, physical experiments, environmental remediation, optical devices, and high - speed particle capture due to its ultra - low thermal conductivity and open pore structure. However, one of the main disadvantages of this material is its brittleness, which limits its potential in miniaturized applications. Although the mechanical properties in large - scale building and industrial heat insulation applications can be improved by fiber reinforcement or using adhesives, these methods are not suitable for miniaturized objects that require high precision.

To meet the above challenges, this paper proposes a direct ink writing (DIW) protocol. The ink is prepared by suspending silica aerogel powder in a diluted silica nanoparticle solution (sol). This method enables the printed aerogel objects to maintain their original high specific surface area (751 m²/g) and extremely low thermal conductivity (15.9 mW/m·K), and functional nanoparticles can be easily added to expand their application range. In addition, this method also shows potential uses in thermal management, as a micro - gas pump, and in degrading volatile organic compounds.

In summary, the core objective of this paper is to provide an innovative additive manufacturing solution to realize the miniaturization of silica aerogel and open up new application scenarios for this material.