Abstract:The ambient temperature has a great influence on the practical application of the supercritical carbon dioxide(S-CO2) Brayton cycle. The introduction of mixtures is an effective way to change the critical characteristics of the working fluid, which allows the system to better match the ambient temperature. The mixtures not only affect the overall performance of the power system, but also affect the flow and heat transfer processes in various heat exchange equipment. In this investigation, the physical model of a sinusoidal wavy channel printed circuit heat exchangers (PCHE) is built, and numerical simulations are conducted firstly on the flow and heat transfer characteristics of three S-CO2 mixtures (CO2-He, CO2-Ke and CO2-Xe). Effects of the mole fraction and type of the additive gasses on the thermal-hydraulic performance are discussed, as well as the variations of the local heat transfer coefficients and pressure drop along the flow direction. It's found that transfer coefficient and pressure drop of CO2-He increase with the increase of the additive gas mole fraction n, with maximum heat increases of 396 % and 1147 % against pure S-CO2, respectively. With the increase of n, heat transfer coefficient and pressure drop of CO2-Kr and CO2-Xe decrease. Maximum decreases of 71 % and 38 % can be seen for the heat transfer coefficient and pressure drop against pure CO2 for CO2-Kr, and 80 % and 64 % against pure CO2 for CO2-Xe, respectively. CO2-Xe yields the best thermal-hydraulic performance of the PCHE among the three mixtures. Secondly, machine learning is adopted to predict the local flow and heat transfer characteristics of S-CO2 mixtures in response to the significant variation of S-CO2 mixtures along the flow direction within the PCHE. Four machine learning models including Support vector machine (SVR), Artificial neural network (ANN), Random forest (RF) and Extreme Boosting Tree (XGBoost) are used and the corresponding prediction performance are analysed. It is found that machine learning is efficient and accurate in the prediction. Among the four machine learning models, XGBoost has a strong fitting ability to the local Nu and f, with an R 2 of 0.9992 and 0.9718 on the test set, respectively. The prediction results of the XGBoost model can reflect the variations of local Nusselt number and friction factor along the flow direction well. However, ANN has stronger generalization ability in the prediction under new working conditions. The use of machine learning can greatly help the design and optimization of PCHEs with S-CO2 mixtures as working fluids.

Prediction of supercritical CO2 heat transfer behaviors by combining transfer learning and deep learning based on multi-fidelity data

Transfer learning model to predict flow boiling heat transfer coefficient in mini channels with micro pin fins

Deep-Learning Strategy Based on Convolutional Neural Network for Wall Heat Flux Prediction

Heat Flux Prediction of Radiation Balance Wall by Deep Convolutional Neural Networks

Machine learning and prediction study on heat transfer of supercritical CO 2 in pseudo-critical zone

Supercritical carbon dioxide critical flow model based on deep learning

Data-driven approach to predict the flow boiling heat transfer coefficient of liquid hydrogen aviation fuel

Multi-fidelity prediction of fluid flow and temperature field based on transfer learning using Fourier Neural Operator

Comparative study for flow condensation heat transfer in horizontal enhanced tubes based on machine learning

Heat Transfer Coefficient Predictions of the Air-Cooled Condenser with Machine Learning Based on the Operation Big Data of the Power Plant

High precision aerodynamic heat prediction method based on data augmentation and transfer learning

Numerical study and machine learning on local flow and heat transfer characteristics of supercritical carbon dioxide mixtures in a sinusoidal wavy channel PCHE

PREDICTION OF PARAMETERS OF BOILER SUPERHEATER BASED ON TRANSFER LEARNING METHOD

Prediction of boiler gas side effective heat transfer coefficients using mixture density networks and historic plant data

Learning time-aware multi-phase flow fields in coal-supercritical water fluidized bed reactor with deep learning

High‐heat Flux Flow and Heat Transfer Transitions in a Supercritical Loop: Numerical Verification and Correlation

Deep learning-based assessment of saturated flow boiling heat transfer and two-phase pressure drop for evaporating flow

Assessing the effects of fluids flow on heat transfer performance in direct contact heat transfer process through EMD-LSSVM model: An experimental study

Data-Driven Dimensional Analysis of Critical Heat Flux in Subcooled Vertical Flow: A Two-Stage Machine Learning Approach

On the prediction of critical heat flux using a physics-informed machine learning-aided framework

Research on temperature field prediction method in an aero-engine combustor with high generalization ability