Abstract:Thermal expansion coefficient is an important parameter of thermal physical properties. Materials with zero thermal expansion (ZTE) are urgently needed in engineering applications, particularly in aerospace, precision instruments, and civil engineering, where the control of thermally induced expansion and stress over a wide range of temperatures is of significance. On the other hand, thermal expansion compensation requires materials to possess negative thermal expansion (NTE) and even a desirable positive thermal expansion (PTE). For example, thermal expansion modulation can be achieved via composites with an appropriate ratio of NTE inclusions and PTE substrates. In general, engineering applications have a serious need for materials and structures with tailorable CTEs. Hence, development of material with tailorable thermal expansion is of important scientific significance and engineering applications. At present, the available range of CTE in engineering materials is quite narrow. To obtain wide range of CTE, most of current researches are mainly concentrated on bulk materials and composites. Specifically, few bulk materials with low and negative CTEs have been reported. FeNi-based Invar alloysexhibit low CTEs because of the magneto-volume effect which, however, only exists under the Curie temperature (about 100°C). A family of ceramics with isotropic NTE and metal oxides with anisotropic NTEs, has been widely studied. Unfortunately, the inherent brittleness and low fracture toughness of the NTE ceramics restrict their usage in load-bearing applications. Fiber-reinforced composites are capable of providing tailorable CTEs because some fibers, such as carbon and graphite fibers, possess negative axial CTEs. However, largely different CTEs between the fiber and the matrix always result in matrix cracking under large temperature variation. Besides, through topology optimization of the three-phase composites, ZTE and the maximum uniaxial/biaxial stiffness characteristics can be obtained. However, the optimized geometries are still too complex for practical manufacture and engineering applications. It is important to integrate tailorable CTE with lightweight and robust mechanical properties for the materials. Lightweight composites attract intensive studies by virtue of their low density, excellent mechanical properties as well as tailorable thermal expansion coefficient. This paper firstly summarizes the significant engineering applications of thermal expansion controlling as well as the bulk materials with low and negative thermal expansion. Moreover, research achievements of the laminate, particle reinforced and topologically optimal composites with tailorable thermal expansion are detailly introduced. Finally, we present the latest research progress including geometry design methods, mechanisms, fabrication process and experimental characterization of tailorable thermal expansion for lightweight lattice composites. The design of lattice materials which are assembled through dual-material members, and honeycomb-like hybrid lattices which are composed of inner triangle and outside honeycomb initiates the macro scale lightweight lattice composites for tailorable CTE. However, the lattice composites with bending-dominated members display less stiffness compared with stretch-dominated lattices. Moreover, the complicated geometrical connections of the members lead to manufacture complexity. Triangle lattice composite exhibits tailorable CTE and are used as the basic unit to construct other lattice configurations such as the near zero thermal expansion lattice structures. Thus, numerous studies find the planar lattices and structures design based on this unit. With the development of advanced manufacturing technology, the study of the lightweight lattice composites will be promoted more deeply.

Design of hourglass-lattice metastructure with near-zero thermal expansion using structural optimization method

Load-bearing Sandwiched Metastructure with Zero Thermal-Induced Warping and High Resonant Frequency: Mechanical Designs, Theoretical Predictions, and Experimental Demonstrations

Three dimensional lightweight lattice structures with large positive, zero and negative thermal expansion

Near-zero Thermal Mismatch Flexure Metastructure with High-Resonant Frequency

Design of near-zero thermal expansion composites with superior mechanical properties in a wide temperature region

Zero Thermal Expansion High-Strength Metallic Glass-Based Composites

Drastic Tailorable Thermal Expansion Chiral Planar and Cylindrical Shell Structures Explored with Finite Element Simulation

High-performance Zero Thermal Expansion in Al Metal Matrix Composites

A new design concept of dual-constituent sandwich panel with in-plane zero thermal expansion

Development of Designing Lightweight Composites and Structures for Tailorable Thermal Expansion

Design and Application of Composite Platform with Extreme Low Thermal Deformation for Satellite

Planar Lattices with Tailorable Coefficient of Thermal Expansion and High Stiffness Based on Dual-Material Triangle Unit

Design of negative/nearly zero thermal expansion behavior over a wide temperature range by multi-phase composite

A series of auxetic metamaterials with negative thermal expansion based on L -shaped microstructures

Near-zero thermal expansion of ZrW2O8/Al–Si composites with three dimensional interpenetrating network structure

Lightweight Composite Lattice Cylindrical Shells with Novel Character of Tailorable Thermal Expansion

An Auxetic Material With Negative Coefficient of Thermal Expansion and High Stiffness

ZrW2O8/ZrO2 Composites with Low/Near-Zero Coefficients of Thermal Expansion Fabricated at Ultralow Temperature: an Integration of Hydrothermal Assembly and a Cold Sintering Process

Evaluating Lattice Mechanical Properties for Lightweight Heat-Resistant Load-Bearing Structure Design

Multifunctional mechanical metamaterials with tunable double-negative isotropic properties

A multifunctional three-dimensional lattice material integrating auxeticity, negative compressibility and negative thermal expansion