Abstract:The presence of abundant clay components and microporous structure in shale results in its high hydrophilicity, making a water-rich environment inevitable in petroleum exploration projects. Therefore, it is crucial to consider the influence of bedding structure, moisture content, confining pressure, and their combined effects on the geomechanical properties of shale. This article aims to investigate the mechanical properties of deep shale under varying water content conditions, elucidate the failure mode and failure mechanism of shale in actual engineering scenarios, and explores the interplay between stress, structure, moisture content, and other factors on its mechanical properties. The evaluation of wellbore stability and fracture propagation effects is proposed based on laboratory experiments using triaxial stress and strain data, along with the application of energy evolution theory. The experimental procedures encompass an analysis of shale's microscopic components and structure, as well as anisotropic shale triaxial compression tests conducted under different moisture contents and confining pressures. The results demonstrate that shale exhibits dense pores in its microstructure and displays pronounced anisotropic characteristics in its macrostructure. The presence of water within these pores, combined with the in situ stress within the formation, significantly influences the mechanical properties of shale. This anisotropy decreases with increasing moisture content, but the mechanical performance still decreases. Under triaxial compression conditions, the increase in confining pressure to some extent enhances the anisotropy of shale's deformation characteristics, which is related to the failure modes of shale. However, the detrimental effect of moisture content on shale's mechanical properties still persists. In order to quantify the impact of these factors, this study utilizes the elastic modulus as an indicator of the coupling effect. It combines the triaxial strain curve obtained from laboratory tests and proposes an evaluation index for shale mechanical properties based on the energy evolution theory. This index is suitable for assessing wellbore stability (the stability index called SI r ) and crack expansion (the brittleness index called BI r ). The calculation results reveal that, during the wellbore drilling process, excavating parallel to the direction of shale bedding while maintaining low moisture content and high confining pressure yields a higher SI r value, indicating better wellbore stability. On the other hand, during reservoir fracturing, fracturing perpendicular to the shale bedding direction and maintaining low confining pressure and moisture content result in a smaller BI r value. This approach is more beneficial for the expansion of shale fracture network in engineering.

Experimental study on the static and dynamic elastic stiffness of rock samples from a shale oil reservoir

Anisotropic dynamic and static mechanical properties of organic-rich shale: The influence of stress

Study on the nonlinear time-dependent deformation characteristics and viscoelastic-plastic model of shale under direct shear loading path

Rock Physics Modeling Studies on the Elastic and Anisotropic Properties of Organic-Rich Shale

Experimental Investigation of Stress Sensitivity of Elastic Wave Velocities for Anisotropic Shale in Wufeng–Longmaxi Formation

Anisotropic dispersion mechanism of inter-salt shale oil reservoir in terrestrial saline lake sediments using cross-band experiments

Experimental research on anisotropic properties of shale

Elasticity and Characteristic Stress Thresholds of Shale under Deep In Situ Geological Conditions

The investigation of multiple factors on elastic anisotropy of artificial shale based on the orthogonal experiment

A rock physics modelling algorithm for simulating the elastic parameters of shale using well logging data

Experimental and numerical study on dynamic mechanical behaviors of shale under true triaxial compression at high strain rate

Non-Destructive Pore-Scale Approach to Evaluate Elastic Properties of Shale Samples by Imaging, Modeling and Simulation

Experimental quantification of the evolution of the static mechanical properties of tight sedimentary rocks during increasing-amplitude load and unload cycling

Multiscale Elastic Anisotropy of a Shale Characterized by Cross-Scale Big Data Nanoindentation

Experimental and constitutive modeling of the anisotropic mechanical properties of shale subjected to thermal treatment

An empirical elastic anisotropy prediction model in self-sourced reservoir shales and its influencing factor analysis

Experimental investigation on dynamic and static rock mechanical behavior, failure modes and sequences of frequent interbedded sand and shale reservoirs

Experimental study on mechanical properties of shale rock and its strength criterion

Characterization of Rock Mechanical Properties Using Lab Tests and Numerical Interpretation Model of Well Logs

Investigation of the anisotropic mechanical response of layered shales

Study on failure characteristics and evaluation index of aquifer shale based on energy evolution