Abstract:A corn stalk cellulose-based adsorbent was reasonably designed and synthesized by two steps of modification to effectively remove Cd(II) and Ni(II) from wastewater of nickel–cadmium (Ni–Cd) and nickel-metal hydride (Ni-MH) batteries. Glycidyl methacrylate (GMA), N,N-methylene-bis- acrylamide (MBA), and potassium persulfate (KSP) was selected as the grafting monomer, cross-linking agent and initiator, respectively, in the first step to introduce enough epoxy groups and generate three dimensional (3D) network structures on the cellulose (Cell) surface. Under the optimum conditions of weight ratio of GMA: Cell = 3:1, 20 mmol L–1 KSP, 5.0 wt.% of MBA to Cell and 60°C for 2 h, the maximum grafting efficiency and the amount of epoxy groups could reach 93.69% and 4.96 mmol g–1, respectively. Then this grafted and cross-linked product (Cell-g-GMA-c-MBA) was further reacted with diethylenetriamine (DETA) to introduce amino groups on the adsorbent. The final adsorbent (Cell-g-GMA-c-MBA-DETA) with the maximum amount of 7.20 mmol g–1 amino groups was obtained under the optimized amination conditions. The experiment results showed that the maximum adsorption capacity of Cd(II) and Ni(II) on Cell-g-GMA-c-MBA-DETA could reach 367.3 and 295.9 mg g–1, respectively at 45°C and pH = 4.5. The detailed investigation on relationships between microstructures and adsorption performances of Cell-g-GMA-c-MBA-DETA proved that the introduced sufficient amino groups were the major adsorption sites to adsorb Cd(II) and Ni(II). Cd(II) was inclined to be adsorbed by forming chelation complexes with 2–3 mmol N atoms from amino groups while the adsorption of Ni(II) would require at least 1 mmol N atom from amino groups by accepting lone-pair electrons and forming coordinate bonds. This modified cellulose also displayed a good reproducibility, whose regeneration efficiency for adsorbing Cd(II) and Ni(II) after sixth cycles were still 80% and 82%, respectively. It could be considered as a promising material for effective removal of Cd(II) and Ni(II) from batteries wastewater.

Preparation of UiO-66-NH2@cellulose nanofiber composite film and its adsorption performance study towards Cd(II)

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Preparation and Characterization of Cellulose-Based Adsorbent and Its Application in Heavy Metal Ions Removal.

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Integrating of metal-organic framework UiO-66-NH2 and cellulose nanofibers mat for high-performance adsorption of dye rose bengal

Synthesis of cadmium(ii) ion-imprinted composite membrane with a pyridine functional monomer and characterization of its adsorption performance

Cellulose-embedded polyacrylonitrile/amidoxime for the removal of cadmium (II) from wastewater: Adsorption performance and proposed mechanism

Adsorption of heavy metal ions from aqueous solution by carboxylated cellulose nanocrystals

Adsorption of Pb(II) from Aqueous Solutions Using Nanocrystalline Cellulose/Sodium Alginate/K-Carrageenan Composite Hydrogel Beads

A Novel Cellulose-Based Composite Hydrogel Microsphere Material: for Efficient Adsorption of Co(II) and Ni(II) Ions in Water

Nanoporous magnetic cellulose-chitosan composite microspheres: Preparation, characterization, and application for Cu(II) adsorption

Understanding competitive Cu 2+ and Zn 2+ adsorption onto functionalized cellulose fiber via experimental and theoretical approach

CaCO3-coated PVA/BC-based composite for the simultaneous adsorption of Cu(II), Cd(II), Pb(II) in aqueous solution

Facile in situ synthesis of cellulose microcrystalline-manganese dioxide nanocomposite for effective removal of Pb(II) and Cd(II) from water

Reasonable design of a corn stalk cellulose-based adsorbent for adsorption of Cd(II) and Ni(II): adsorption behaviors and mechanisms

Electrospun Carboxymethyl Cellulose/Polyvinyl Alcohol Nanofiber Membranes for Enhanced Metal Ion Removal

A multi-functional-group modified cellulose for enhanced heavy metal cadmium adsorption: Performance and quantum chemical mechanism

Silver Nanoparticles Supported onto TEMPO-Oxidized Cellulose Nanofibers for Promoting Cd 2+ Cation Adsorption

All-biomass cellulose/casein adsorbent fabricated via the "green solvent system" of ionic liquid for the efficient removal of Cu(II), Cd(II) and Pb(II)

Removal of Cd(II) from Aqueous Solution by Electrospun Nylon 6 Nanofibrous Nonwoven Containing Attapulgite

Synthesis of cellulose cotton-based UiO-66 MOFs for the removal of rhodamine B and Pb(II) metal ions from contaminated wastewater