A Sc0.096 Al0.904N-Based Bimorph Piezoelectric MEMS Microphone Using 3x3 Circular Diaphragms
Bohao Hu,Wenjuan Liu,Yan Liu,Chaoxiang Yang,Zekai Wang,Liangyu Lu,Yao Cai,Shishang Guo,Chengliang Sun
DOI: https://doi.org/10.1109/ted.2024.3376320
IF: 3.1
2024-01-01
IEEE Transactions on Electron Devices
Abstract:This work presents a bimorph piezoelectric microelectro mechanical system microphone (b-PMM) with high receiving sensitivity and signal-to-noise ratio (SNR)based on an array of circular diaphragms in a size of0.375x3x3 mm(3). The b-PMM is fabricated using Sc0.096Al0.904N with thicknesses of 486.56 and 478.45 nm, respectively. The lumped element model and mechanical analysis of the diaphragm array are established, and the bimorphstructure shows increased sensitivity and decreased noise.Electro-acoustic measurements are presented in an anechoic test box (B&K 4232). Compared with the AlN-basedb-PMM, the sensitivity and SNR of the ScAlN-based one are-69 dB (re: 1 V/Pa) and 58.4 dB at 1 kHz, increased by 16.4%and 3.4 dB, respectively. Besides, the measured minimumdetectable pressure (MDP), resolution, and total harmonicdistortion (THD) are 35.6 dB SPL, 34 dB SPL, and 0.087%at 1 kHz, respectively. The ScAlN-based b-PMM with highnoise resolution will have a bright prospect in applicationscenarios such as intelligent voice acquisition and controlscenarios.