Abstract:The demand for lithium resources continues to increase due to the rapid development of electronic vehicles, energy storage equipment, and other electronic products. Extracting lithium from salt lake brines is of great significance because of the predominance of brine lithium resources. Because both sodium and lithium ions are monovalent cations and have similar chemical properties, it is difficult to extract lithium from high-sodium brine. Herein, an adsorption-coupled electrochemical (ACEC) technology was utilized for lithium extraction. Manganese oxide coated with an ultrathin (1–2 nm) carbon layer ( MnOx@C), obtained by a precursor method, is utilized as a membrane electrode in a membrane capacitive device. The crystal structure and carbon layer thickness of MnOx@C are effectively controlled by adjusting the preparation conditions. When the core is mainly a MnO phase, the lithium extraction capability of the membrane electrode is significantly improved. The lithium adsorption capacity reaches as high as 51.8 mg/g, and the adsorption time is 550 s from high-sodium brine (Na/Li ratio = 48.6). The desorption rate of lithium ions is 91.3% during a reverse process. Compared with either membrane capacitance or adsorption methods, the adsorption capacity reached with this technology is in the lead. The synergy of adsorption and Faradaic redox reactions leads to remarkably enhanced lithium extraction capability. This ACEC technology provides an alternative pathway to extract lithium from brines with high efficiency and facile operation.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02442.Calculation details, schematic diagram, XRD patterns, Raman spectra, N2 adsorption–desorption isotherms, XPS spectra, Mn species analyses, relation profile of lithium-ion concentration and conductivity, and sodium-ion concentration change profile (PDF)This article has not yet been cited by other publications.

An efficient extraction of lithium from salt lake brine Method

Lithium salt lake brine extraction method

Recovery of lithium from salt lake brine with high Na/Li ratio using solvent extraction

Recovery of lithium from salt-lake brines using solvent extraction with TBP as extractant and FeCl3 as co-extraction agent

Recovery of lithium from salt lake brine using a mixed ternary solvent extraction system consisting of TBP, FeCl3 and P507

A New Process to Produce Electric Grade Lithium Carbonate from the Baqiancuo Salt Lake Brine by Solvent Extraction

Solar-driven membrane separation for direct lithium extraction from artificial salt-lake brine

Selective extraction of lithium ions from salt lake brines using a tributyl phosphate-sodium tetraphenyl boron-phenethyl isobutyrate system

Study on extraction of lithium from salt lake brine by membrane electrolysis

Recovery of lithium resources from salt lake brines using a novel low dissolution loss extractant of DEHEHP with FeCl 3

Lithium Recovery from Salt Lake Brine by Counter-Current Extraction Using Tributyl Phosphate/fecl3 in Methyl Isobutyl Ketone

Extraction of lithium from Chinese salt-lake brines by membranes: Design and practice

Extraction of lithium from salt lake brine containing boron using multistage centrifuge extractors

Extraction of lithium from salt lake brine containing borate anion and high concentration of magnesium

Lithium extraction from low-grade salt lake brine with ultrahigh Mg/Li ratio using TBP – kerosene – FeCl3 system

Solid-State Electrolyte for Lithium Extraction from Salt Lake Brines

Novel approaches for lithium extraction from salt-lake brines: A review

Highly selective extraction of lithium ions from salt lake brines with sodium tetraphenylborate as co-extractant

Extraction of lithium from brines with high Mg/Li ratio by the crystallization-precipitation method

Highly Efficient Lithium Extraction from Brine with a High Sodium Content by Adsorption-Coupled Electrochemical Technology

Extracting Lithium from Brines by Absorption Method