Abstract:As one of the world's most fragile and sensitive ecological regions, Xizang risks significant environmental damage from using traditional materials, including cement and lime, to improve and reinforce loose accumulated sandy soil slopes. To address this issue, this study utilized a low-concentration biodegradable polyvinyl alcohol (PVA) solution combined with sisal fibers (SFs) to stabilize loose accumulated sand in southeastern Xizang. A series of physical, mechanical, and microscopic analyses was conducted to evaluate the properties of the treated sand. The results indicated the following. 1) The stress-strain curves of the improved samples exhibited an elastic-plastic relationship. Failure was observed in two stages. At a strain of 3% or less, the samples demonstrated elastic deformation with a linear increase in stress, whereas the deviator stress increased rapidly and linearly with an increase in axial strain. Once the strain exceeded 3%, the deformation became plastic with a nonlinear increase in the stress-strain relationship, and the growth rate of the deviator stress gradually decreased and leveled off. 2) Under varying confining pressure conditions, the relationship curve between the maximum (σ 1 -σ 3 ) max ∼σ 3 for both untreated loose accumulated sandy soil and soil improved with the PVA solution, and the sisal fiber was approximately linear. 3) The SFs created a skeletal-like network that encased the soil particles, and the hydroxyl functional groups in the PVA molecules bonded with both the soil particles and the fiber surface, thereby enhancing the interfacial properties. This interaction resulted in a tighter connection between the soil particles and SFs, which improved the stability of the structure. 4) The incorporation of a PVA solution and SFs significantly enhanced the mechanical strength and deformation resistance of the loose accumulated sandy soil. The optimal ratio for the improved soil was S P = 3% and S L = 15 mm, which increased the cohesion from 24.54 kPa in untreated loose accumulated sandy soil to 196.03 kPa. These findings could be applied in engineering practices to improve and reinforce loose accumulated sandy soil slopes in southeastern Xizang and provide a theoretical basis for such applications.

Mechanical properties and microstructure evolution of two ecological slope-protection materials under dry-wet cycles

Performance test and effect evaluation of guar gum-stabilized loess as a sustainable slope protection material

Study on the mechanical properties and microstructural evolution of loess under different wet dry and freeze thaw coupled cycling paths

Mechanical behavior and strengthening mechanism of loess stabilized with xanthan gum and guar gum biopolymers

Evolution and Influencing Mechanisms of the Yili Loess Mechanical Properties under Combined Wetting-Drying and Freeze-Thaw Cycling

Study on Improving Loess Properties with Permeable Polymer Materials

Study on The Influence of Freezing and Thawing Cycle and Dry and Wet Alternation on Mechanical Properties and Engineering Application of Loess Slope

Effect of Dry-Wet Cycles and Freeze-Thaw Cycles on the Antierosion Ability of Fiber-Reinforced Loess

Exploration on mechanical test method of improved loess under dry-wet cycles

Experimental study on structural effects of particle migration in Malan loess under different dry and wet conditions

Exploring the mechanical behavior and microstructure of compacted loess subjected to dry-wet cycles and chemical contamination

Influence of dry-wet cycles on the strength behavior of basalt-fiber reinforced loess

Multiscale study on the microstructural evolution and macromechanical deterioration of expansive soil under dry–wet cycles

Investigation of Changes to Triaxial Shear Strength Parameters and Microstructure of Yili Loess with Drying–Wetting Cycles

Splitting tensile strength and microstructure of xanthan gum-treated loess

Surface rainfall erosion resistance and freeze-thaw durability of bio-cemented and polymer-modified loess slopes

Shear Strength and Mesoscopic Characteristics of Basalt Fiber–Reinforced Loess after Dry–Wet Cycles

Influence of Dry-Wet Cycles on the Structure and Shear Strength of Loess

Analysis of the mechanical properties and micro-reinforcement mechanisms of loose accumulated sandy soil improved with polyvinyl alcohol and sisal fiber

Microstructure and soil-water retention behavior of compacted and intact silt loess

Mechanical characterization and water stability of loess improved by bio-based materials: An eco-friendly approach