Preparation and anisotropic tribological properties of MoAlB/Al laminated composites

Qinhuan Wang,Dong Zhao,Mengqi Li,Fuqiang Ren,Chunyang Duan,Zenghua Zhao,Yunfa Chen,Yu Wang

DOI: https://doi.org/10.1016/j.ceramint.2020.10.079

IF: 5.532

2021-02-01

Ceramics International

Abstract:<p>The unique microstructure of biomaterials provides inspiration in materials structure design and performance breakthroughs. Here we prepared a MoAlB reinforced Al matrix composites with laminated structure and strong interfacial bonding. This work mainly focuses on the relationship between tribological properties of the MoAlB/Al laminated composites and the MoAlB layer orientation. The results show that the tribological properties of the composites deeply depend on the relation of sliding direction VS. the MoAlB layer orientation, while the dependency gradually decreases with the MoAlB content increasing. The friction coefficient and wear rate of the composites can be decreased by 55.5% and 95.1%, lower than those of pure Al, when 15 vol% MoAlB reinforcement is added. The friction and wear mechanisms of the MoAlB/Al laminated composites are proposed, and the outstanding tribological properties are ascribed to the formation of tribochemical worn film and different stress states caused by the laminated structure.</p>

materials science, ceramics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is that aluminum - based composites cannot meet the increasing performance requirements when used as moving parts due to their high coefficient of friction and wear rate. Specifically, the paper studied the preparation of MoAlB - reinforced aluminum - based layered composites and their anisotropic tribological properties. By adjusting the orientation and content of MoAlB layers, the author explored how these factors affect the coefficient of friction and wear rate of the composites, with the aim of developing new aluminum - based composites with excellent antifriction and anti - wear properties.

The paper mentioned that although aluminum - based composites have attracted attention in fields such as aviation, aerospace, weapons, and vehicles because of their light weight, high strength, easy formability, corrosion resistance, and good electrical and thermal conductivity properties, their high coefficient of friction and wear rate limit their application range. Therefore, in this paper, by introducing the MoAlB reinforcement phase, an aluminum - based composite with a layered structure was designed to improve its tribological properties. The study found that the tribological properties of the composites are closely related to the orientation of MoAlB layers, and this dependence gradually weakens as the MoAlB content increases. When 15 volume percent of the MoAlB reinforcement phase was added, the coefficient of friction and wear rate of the composites were reduced by 55.5% and 95.1% respectively, which were significantly lower than those of pure aluminum.

In addition, the paper also discussed the friction and wear mechanisms of MoAlB/Al layered composites, believing that their excellent tribological properties are attributed to the formation of tribochemical wear films and the different stress states caused by the layered structure. These findings are of great significance for the development of high - performance engineering materials.