Abstract:Background: Platinum (Pt), palladium (Pd), rhodium (Rh) and iridium (Ir) are platinum group elements (PGEs) and also important elements of geochemistry and environmental chemistry with the similar physic-chemical properties, which have been widely used in industry and laboratory. However, due to the low abundance and inhomogeneous distribution in natural ore as well as the nugget effect, the accurate determination of PGEs has been a challenge to analytical chemistry. Methods: In this work, a novel fire assay method was reported for the determination of ultra-trace Pt, Pd, Rh and Ir in geochemical samples. Tin powder (Sn) instead of stannic oxide (SnO 2 ) was used as a fire assay collector to reduce the melting temperature from 1250°C to 1050°C, the escape of molten material caused by high temperature was successfully avoided. Tin bead was compressed into thin slice and dissolved by HCl. For the target Pt, Pd, Rh and Ir, HCl insoluble substance such as PtSn 4 , PdSn 4 , RhSn 4 and Ir 3 Sn 7 were formed and separated from matrix by filtering. The metal compounds precipitate together with filter paper were microwave-assisted completely digested by aqua regia (50%, v/v), thence the sample solution was determined by inductively coupled plasma mass spectrometry (ICP-MS). Results: Compared with nickel oxide and lead oxide in nickel sulfide /lead fire assay, the reagent blank of tin powder were relatively low and could be directly employed in tin fire assay to collect Pt, Pd, Rh and Ir without purifying. Moreover, the harm of nickel oxide and lead oxide to the analyst and environment was avoided by using the non-toxic tin powder. The decomposition method of chromite and black shale was investigated as well as the amount of tin powder and flour, microwave digestion program for the determination of Pt, Pd, Rh and Ir were optimized. Besides, the influence of mass spectrum interference of co-existing elements was discussed and the standard mode and kinetic energy discrimination collision pool mode were compared. Under the optimal conditions, excellent curve fitting of Pt, Pd, Rh and Ir were obtained between 0.01~100 ng mL -1 , with the correlation coefficients exceeding 0.9996. The detection limits were from 0.003 ng g -1 to 0.057 ng g -1 . Conclusion: The developed method was applied to analyze the Chinese Certified Reference Materials and the determined values were in good agreement with the certified values.

EDTA‐Assisted MPT‐MS for Trace Analysis of Heavy Metals in Fireworks

Microwave Plasma Torch Mass Spectrometry for Some Rare Earth Elements

Development of Microwave Plasma Torch Mass Quadrupole Spectrometer

A Rapid Method for Detection of Gunshot Residue Using Microwave Plasma Torch-Mass Spectrometry

Study of Electrochemical Sensor for Trace Heavy Metals Detection in Aqueous Solutions

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Analysis of Trace Heavy Metal in Solution Using Liquid Cathode Glow Discharge Spectroscopy

Optimized ultrasound-assisted dispersive liquid–liquid microextraction for simultaneous trace multielement determination of heavy metals in environmental water samples by ICP-MS

Simultaneous Multi-Elemental Speciation of As, Hg and Pb by Inductively Coupled Plasma Mass Spectrometry Interfaced with High-Performance Liquid Chromatography

Simultaneous Determination of Ultra-trace Pt, Pd, Rh and Ir in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry Following Tin Fire Assay Preconcentration and Microwave Digestion

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

[Determination of sodium, magnesium, calcium, lithium and strontium in natural mineral drinking water by microwave plasma torch spectrometer with nebulization sample introduction system]

Rapid Analysis of Pharmaceutical and Personal Care Products by Soft Microwave-Based Plasma Ionization-Linear Ion Trap Mass Spectrometer (SMPI-LTQ) in Natural Water.

Trace detection of styphnate from pre- and post-blast samples by hydrophilic interaction chromatography with tandem mass spectrometry

Rapid analysis of chemical warfare agents by metal needle-enhanced low-temperature plasma mass spectrometry

Direct Detection of Explosives on Solid Surfaces by Mass Spectrometry with an Ambient Ion Source Based on Dielectric Barrier Discharge

Selective quantification of trace palladium in road dusts and roadside soils by displacement solid-phase extraction online coupled with electrothermal atomic absorption spectrometry.

Bismuth fire assay preconcentration and empirical coefficient LA-ICP-MS for the determination of ultra-trace Pt and Pd in geochemical samples

Sequential Speciation Analysis of Heavy Metals in Drinking Water Pipe Scales by Mass Spectrometry

Ion chromatographic quantification of nine cationic components in pre-blast and post-blast residues of pyrotechnic samples

Detection of Trace Explosives Using a Novel Sample Introduction and Ionization Method