Abstract:Thermogravimetric data obtained is interpreted using novel non‐isothermal integral method and compared it with several kinetic models. By comparison the activation energies, it has been concluded that new integral method gave the sharp range and consistent value with highest correlation coefficient, indicating that new developed non‐isothermal method is most suitable for determination of kinetic parameters. The kinetic parameters seem to be very helpful in investigating the reaction mechanism of the solid‐state reactions in real system and will give an opportunity to develop the mechanism of the decomposition reaction. A tremendous increase in municipal plastic waste is observed due to high consumption of polymers. With the passage of time the available landfills for discarding of waste plastics decrease whereas, appropriate recycling methods for waste plastics gaining more and more importance. In the present work thermal decomposition of polystyrene (PS) and polyethylene (PE) waste mixture was carried out at different heating rates (5, 10, 15 and 20 °C/min) in a thermogravimetric analyzer (TGA). Thermogravimetric data obtained was further interpreted using new developed non‐isothermal integral method and compared it with several kinetic models i. e., Coats Redfern (CR), Ozawa Flynn Wall (OFW), Kissinger‐Akahira‐Sunose (KAS), Achar and Criado‐Dollimore (CD). The activation energy (Ea) calculated using CR, OFW, KAS, Achar and CD models were found to be in the range of 92.7–130.6, 85.3–120.1, 82.1–113.2, 114.8–162.1 and 95.4–134.4 kJmol−1 respectively, whereas Ea determined by using new developed non‐isothermal method was found to be in the range 70.9 to 106.3 kJmol−1.By comparison the activation energies, it has been concluded that new integral method gave the sharp range and consistent value with highest correlation coefficient, indicating that new developed non‐isothermal method is most suitable for determination of kinetic parameters. The kinetic parameters seem to be very helpful in investigating the reaction mechanism of the solid‐state reactions in real system and will give an opportunity to develop the mechanism of the decomposition reaction.

Thermal degradation kinetics and reaction mechanisms of HDPE and PS plastic wastes using a micro combustion calorimeter

Investigating Kinetic Behavior and Reaction Mechanism on Autothermal Pyrolysis of Polyethylene Plastic

Pyrolysis of Mixed Plastic Waste: I. Kinetic Study

Kinetic and Thermodynamic Analysis of Thermal Decomposition of Waste Virgin PE and Waste Recycled PE

Kinetic study of pyrolysis of waste polystyrene and polyethylene mixture using novel non‐isothermal method

Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste

Thermodegradation characterization of microplastics: Dispersion effect and pyrolysis kinetics by artificial intelligence

Determination of the Thermodynamic Parameters of the Pyrolysis Process of Post-Consumption Thermoplastics by Non-Isothermal Thermogravimetric Analysis

Pyrolysis study of a waste plastic mixture through different kinetic models using isothermal and nonisothermal mechanism

Thermal behavior, synergistic effect and thermodynamic parameter evaluations of biomass/plastics co–pyrolysis in a concentrating photothermal TGA

Kinetic Analysis of Thermal Degradation of Recycled Polypropylene and Polystyrene Mixtures Using Regenerated Catalyst from Fluidized Catalytic Cracking Process (FCC)

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Statistical Optimization of Pyrolysis Process for Thermal Destruction of Plastic Waste Based on Temperature-Dependent Activation Energies and Pre-Exponential Factors

Thermogravimetric study on thermal degradation kinetics and polymer interactions in mixed thermoplastics

Thermal degradation behaviour and chemical kinetic characteristics of biomass pyrolysis using TG/DTG/DTA techniques

Isothermal co‐pyrolytic kinetics investigation of polystyrene/polymethyl methacrylate blended Bakelite

Isoconversional Analysis of the Catalytic Pyrolysis of ABS, HIPS, PC and Their Blends with PP and PVC

Thermo-catalytic co-pyrolysis of palm kernel shell and plastic waste mixtures using bifunctional HZSM-5/limestone catalyst: Kinetic and thermodynamic insights

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

Non-isothermal degradation kinetics of virgin linear low density polyethylene (LLDPE) and biodegradable polymer blends

A review on kinetic study approach for pyrolysis of plastic wastes using thermogravimetric analysis