Abstract:Thermogravimetric data obtained is interpreted using novel non‐isothermal integral method and compared it with several kinetic models. By comparison the activation energies, it has been concluded that new integral method gave the sharp range and consistent value with highest correlation coefficient, indicating that new developed non‐isothermal method is most suitable for determination of kinetic parameters. The kinetic parameters seem to be very helpful in investigating the reaction mechanism of the solid‐state reactions in real system and will give an opportunity to develop the mechanism of the decomposition reaction. A tremendous increase in municipal plastic waste is observed due to high consumption of polymers. With the passage of time the available landfills for discarding of waste plastics decrease whereas, appropriate recycling methods for waste plastics gaining more and more importance. In the present work thermal decomposition of polystyrene (PS) and polyethylene (PE) waste mixture was carried out at different heating rates (5, 10, 15 and 20 °C/min) in a thermogravimetric analyzer (TGA). Thermogravimetric data obtained was further interpreted using new developed non‐isothermal integral method and compared it with several kinetic models i. e., Coats Redfern (CR), Ozawa Flynn Wall (OFW), Kissinger‐Akahira‐Sunose (KAS), Achar and Criado‐Dollimore (CD). The activation energy (Ea) calculated using CR, OFW, KAS, Achar and CD models were found to be in the range of 92.7–130.6, 85.3–120.1, 82.1–113.2, 114.8–162.1 and 95.4–134.4 kJmol−1 respectively, whereas Ea determined by using new developed non‐isothermal method was found to be in the range 70.9 to 106.3 kJmol−1.By comparison the activation energies, it has been concluded that new integral method gave the sharp range and consistent value with highest correlation coefficient, indicating that new developed non‐isothermal method is most suitable for determination of kinetic parameters. The kinetic parameters seem to be very helpful in investigating the reaction mechanism of the solid‐state reactions in real system and will give an opportunity to develop the mechanism of the decomposition reaction.

A review on kinetic study approach for pyrolysis of plastic wastes using thermogravimetric analysis

Kinetic Analysis of Thermal Degradation of Recycled Polypropylene and Polystyrene Mixtures Using Regenerated Catalyst from Fluidized Catalytic Cracking Process (FCC)

Investigating Kinetic Behavior and Reaction Mechanism on Autothermal Pyrolysis of Polyethylene Plastic

Kinetic study of pyrolysis of waste polystyrene and polyethylene mixture using novel non‐isothermal method

Pyrolysis of Mixed Plastic Waste: I. Kinetic Study

Determination of the Thermodynamic Parameters of the Pyrolysis Process of Post-Consumption Thermoplastics by Non-Isothermal Thermogravimetric Analysis

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

Kinetics Study of Polypropylene Pyrolysis by Non-Isothermal Thermogravimetric Analysis

Thermogravimetric study on thermal degradation kinetics and polymer interactions in mixed thermoplastics

Kinetic and Thermodynamic Analysis of Thermal Decomposition of Waste Virgin PE and Waste Recycled PE

Chemical kinetic models, reaction mechanism estimation and thermodynamic parameters for the thermochemical conversion of solid wastes: Review

Understanding the kinetics of waste plastic catalytic pyrolysis under microwave irradiation for enhanced resource valorization

Pyrolysis kinetics and thermodynamic parameters of plastic grocery bag based on thermogravimetric data using iso-conversional methods

Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Pyrolysis Kinetic Analysis of Molten Bioplastics Based on the Combination of Real-Time Characterization and Guassian Deconvolution: Case Study of Poly(lactic Acid) Materials

Analysis of Pyrolysis Kinetic Parameters Based on Various Mathematical Models for More than Twenty Different Biomasses: A Review

Statistical Optimization of Pyrolysis Process for Thermal Destruction of Plastic Waste Based on Temperature-Dependent Activation Energies and Pre-Exponential Factors

Pyrolysis study of a waste plastic mixture through different kinetic models using isothermal and nonisothermal mechanism

A Study of Parallel and Competitive Reaction Schemes in Kinetic Modeling of Plastic Pyrolysis

Isoconversional Analysis of the Catalytic Pyrolysis of ABS, HIPS, PC and Their Blends with PP and PVC