Abstract:High-temperature superconducting (HTS) tapes, coils, and magnets often experiences intricate quench instabilities and failures during high current-carrying operations, posing challenges to their practical applications. This study addresses the need for a measurement approach capable of monitoring multi-field signals in superconducting structures within cryogenic and extreme electromagnetic environments. We explore the application of distributed fiber optic sensing (DFOS) technology, specifically employing the optical frequency domain reflectometry (OFDR) scheme, which offers distinct advantages over traditional point-type electrical testing methods, particularly for superconducting materials and magnets. In this experimental study, we continuously track the quench evolution process in superconducting tapes using both bonded and stress-free fibers for real-time monitoring. A comprehensive analysis of the acquired temperature and thermoelastic strain profiles provides essential insights into the dynamic behavior of quench events. The findings demonstrate the effectiveness of DFOS in identifying and characterizing the onset and propagation of quenches. By arranging bonded and stress-free fibers in parallel on the HTS tape's surface, we successfully decouple the effects of strain-temperature cross-sensitivity, enabling the extraction of temperature and train profiles. The bonded fiber optic sensor demonstrates rapid sensitivity to the thermally quenched events. Temporal derivatives of voltage and thermal strain exhibit characteristic plateaus and slope changes during quenches, respectively. The voltage rate displays two plateaus corresponding to superconducting-to-normal transitions, while strain rates exhibit potential as criteria for identifying quench events in HTS materials. Moreover, DFOS outperforms traditional terminal average voltage measurement, capturing quench evolution tails from the initial point of quench until the complete transition of the segment into the normal state. This experiment provides a solid foundation for further exploration of the underlying quench mechanism.

Toward an Encapsulated LTS Quench Detector for Fast Quench Detection in HTS Magnets

A new quench detection method for HTS magnets: stray-capacitance change monitoring

A quench detection method for parallel co-wound HTS coils based on current redistribution

A Quench detection method for closed-loop superconducting coils based on currents redistribution in co-windings

Development of a Conduction-Cooled HTS SMES

Quench Detection of 20-kA HTS Current Leads Using Distributed Optical Fibers

Unraveling quench dynamics and real-time continuous detection in HTS Tapes through distributed fiber optic sensing

Behavior during quenches of a 40 T magnet made of LTS and HTS parts

Primary Quench Detection Analysis for the EU-DEMO Toroidal Field Coils

A surface-shunting method for the prevention of a fault-mode-induced quench in high-field no-insulation REBCO magnets

Quench Phenomena in a Conduction-Cooled Fast-Ramping High Temperature Superconducting Magnet

Commissioning, Performance, and Effect of the Quench Current-boosting Device on a Dedicated Superconducting Magnet

Progress of Quench Detection for CFETR TF Prototype Coil

Two Quenched Models for High-Temperature Superconducting Insulated Coils

Quenching of a no-insulation high-temperature superconducting magnet

Quench Protection of Stacks of No-Insulation HTS Pancake Coils by Capacitor Discharge

Practical Investigations of Wireless Multiple-Power Charging Unit for Electron Quench Detection Device in the Super High Field Superconducting Magnet

Impregnation damage monitoring for the canted-cosine-theta magnets using time-domain reflectometry

Quench Detection System for the KSTAR Superconducting Toroidal Field Coil

Modelling and analysis of quench in the 15-kA HTS conductor

Design Study on a 100-Ka/20-k HTS Cable for Fusion Magnets