Abstract:Plenum chambers are widely used in heating, ventilation, and air conditioning systems (HVAC) for homogeneous flow and pressure distribution. To date, scientific design methods and key parameters influencing chamber systems have not been determined for HVAC engineering applications. In this study, a single-path unlined rectangular plenum chamber is used to investigate interior flow characteristics in a confined space. An orthogonal experiment is conducted to identify the key influencing factors and evaluate their significance. Through the analysis of range and variance, the sectional dimensions (W × H) and length (L) of the chamber were found to be the most significant factors for structural design. A structural parametric optimisation method is proposed for the chamber system. The optimal cross-sectional aspect ratio of the plenum chamber (W/H) is determined as follows: when the cross-sectional velocity vchamber ≤ 1 m/s, W/H = 1/1; when vchamber > 1 m/s, the W/H should be as close as possible to 5/1, corresponding to a smaller pressure drop. The generalised velocity profiles in each cross-section are almost the same when the dimensionless length L/de ≥ 3, indicating that the inside "jet" entering the rectangular plenum chamber reaches fully developed flow. The threshold parameter for the optimal length of the chamber was obtained from the perspective of reducing energy consumption. Additionally, the interior flow characteristics of the chamber system were analysed with different configurations. This study provides first-hand data for optimising the structural design of a single-path plenum chamber in an HVAC system.

Optimization of multi-V filter design for airliner environmental control system using an empirical model

Simulation and test of flow process in air filter

Performance optimization of airliner cabin air filters

Experimental study on the synthetic dust loading characteristics of air filters

Multi-objective optimization of axial-flow-type gas-particle cyclone separator using response surface methodology and computational fluid dynamics

Pressure drop and optimization meta-models for arbitrary low-height pleated filter shapes and flowrates

Multi-fidelity expected improvement based on multi-level hierarchical kriging model for efficient aerodynamic design optimization

Filter Pleating Design for Cabin Air Filtration

Optimization on the performance of fibrous filter through computational fluid dynamic simulation coupled with response surface methodology

Multi-objective optimization of a novel vortex finder for performance improvement of cyclone separator

Adjustable fiber structure design for precise aerosol filtration

Flow characteristics and structural parametric optimisation design of rectangular plenum chambers for HVAC systems

Simulation and Optimization of Flow Resistance and Noise Characteristics of Air-cleaner

Optimization design method for components parameter in space station ventilation system based on Flowmaster simulation

Optimization of Pleated Filter Designs Using a Finite-Element Numerical Model

Numerical Investigation of Performance and Multiparameter Prediction Model of High-Pressure Fuel Filters and Cavitation at Filtration Orifices Considering Variable Fluid Properties

A simple semi-numerical model for designing pleated air filters under dust loading

Development of a Multi-Objective Preliminary Design Optimization Approach for Axial Flow Compressors

Size-Dependent Removal Efficiency of Mechanical Ventilation System with Air Filtration Unit for Nanoparticles

Research on models for estimating aerodynamic and energy consumption performance of fan filter units (FFUs)

Influence of pleated geometry on the pressure drop of filters during dust loading process: experimental and modelling study