Abstract:Addressing the escalating threat of environmental pollution and ecological risks resulting from the discharge of organic pollutants into aquatic environments demands immediate and comprehensive solutions. In this context, leveraging agricultural waste to produce activated carbon appears to be an intriguing approach to resolving this pressing environmental problem. This study employed doum fiber ( Chamaerops humilis ) as an alternative precursor for producing low-cost and mesoporous activated carbon (ACDF) with a high surface area (630.92 m 2 /g) through a pyrolysis method involving chemical activation with H 3 PO 4 . The adsorption characteristics of ACDF were investigated for removing phenolic pollutants: Bisphenol A (BPA) and α-Naphthol (ANP). The optimal activation conditions were determined using response surface methodology with full factorial design (RSM-FFD), considering four variable factors: Activation temperature (200–600 °C), Activation time (30–180 min), Concentration of H 3 PO 4 (1–10 mol/L), and Impregnation Ratio (0.5–2 g/mL). The results indicated that the best activation conditions were an activation temperature of 600 °C, an activation time of 43.46 min, an H 3 PO 4 concentration of 8 mol/L, and an impregnation ratio of 0.5. The adsorption equilibrium data from kinetics and isotherm analyses demonstrated that the adsorption of BPA and ANP onto ACDF is appropriately described by the pseudo-second-order and Langmuir models. The maximum adsorption capacity of ACDF was 56.11 mg/g for BPA and 69.97 mg/g for ANP. Thermodynamic parameters indicated that the reactions of both pollutants on the ACDF surface were spontaneous, favorable, and exothermic. Moreover, ACDF displayed a higher affinity and stability over five successive cycles for ANP compared to BPA, owing to its reactivity as confirmed by Density Functional Theory (DFT). The interaction mechanism between the adsorbate and the ACDF surface involved main interactions such as electrostatic interaction, hydrogen bonding, and π-π interactions. The results demonstrate that the optimized ACDF is a cost-effective and readily available option for removing phenolic pollutants from industrial wastewater.

Unravelling the efficiency removal of 2,4-dinitrophenol on coconut shell biomass-derived activated carbons theoretical and experimental investigation

Kinetics of adsorption of 2,4-dichlorophenol by nitrogen doping activated carbon

Adsorption of 2,4-Dichlorophenol from Aqueous Solution Onto Microwave Modified Activated Carbon: Kinetics and Equilibrium

Adsorption of 2,4-Dichlorophenol from Aqueous Solution by a New Low-Cost Adsorbent – Activated Bamboo Charcoal

An Efficient Biochar Adsorbent for CO2 Capture: Combined Experimental and Theoretical Study on the Promotion Mechanism of N-doping

Adsorption of Polychlorinated Dibenzo-P-dioxins/dibenzofurans on Activated Carbon from Hexane.

Synthesis of N-doped Hierarchical Porous Carbon with Excellent Toluene Adsorption Properties and Its Activation Mechanism

Removal of 2,4-dichlorophenoxyacetic acid through nitrogen doped modified palm kernel shell from aqueous solutions

Adsorption of P-Nitrophenol from Aqueous Solutions Onto Activated Carbon Fiber

Coconut shell carbon via phosphoric acid activation for rhodamine B, malachite green, and methylene blue adsorption – equilibrium and kinetics

Removal of the Endocrine Disrupting Chemicals Nonylphenol from Water by Activated Carbon

Adsorptive Removal of Ibuprofen, Ketoprofen and Naproxen from Aqueous Solution Using Coconut Shell Biomass

Removal of Methylene Blue, Chromium (VI), and Phenol from Water via Steam-Activated Coconut Endocarp Carbon in a Semi-Industrial Kiln

Influence of Some Preparation Parameters on The Efficiency of Activated Carbons Prepared from Teak Wood Shavings (Tectona Grandis) and Coconut Shells (Cocos Nucifera) for The Treatment of Industrial Wastewater

Evaluation of a novel activated carbon/graphene oxide as an efficient composite adsorbent for the removal of herbicide 2,4-Dichlorophenoxyacetic acid: Adsorption isotherm and kinetics study

Kinetics and equilibrium study for the adsorption of textile dyes on coconut shell activated carbon

Unveiling the promotional mechanisms of N-doping on the adsorption behaviors of dioxins from sintering flue gas by coconut shell-derived hierarchical porous carbon

Adsorption of anionic wood dyes on KOH-activated carbons from Pinus radiata sawdust

Analysis of adsorption characteristics of 2,4-dichlorophenol from aqueous solutions by activated carbon fiber.

Synthesis and optimization of activated carbon from Doum ( Chamaerops humilis ) fiber via pyrolysis-assisted H 3 PO 4 activation for removal of bisphenol A and α-Naphthol

Kinetics and equilibrium adsorption study of p-nitrophenol onto activated carbon derived from walnut peel