Abstract:The Sebei gas field is in the Sanhu depression area of the Qaidam Basin, which is the main gas-producing area and a key profit pillar for the Qinghai oilfield. The Sebei gas field within the Qinghai oilfield is characterized by high mud content, poor lithology, interflow between gas and water layers, and a propensity for sand production. The reservoir rocks are predominantly argillaceous siltstone with primarily argillaceous cement. These rocks are loose and tend to produce sand, which can lead to blockage. During its development, the Sebei gas field exhibited significant issues with scale formation and sand production in gas wells. Conventional acidization technologies have proven to be slow acting and may even result in adverse effects. These methods can cause loose sandstone to disperse, exacerbating sand production. Therefore, it is necessary to elucidate the mechanisms of wellbore plugging and to develop an acidizing system for plug removal that is tailored to unconsolidated sandstone reservoirs. Such a system should not only alleviate gas well plugging damage but also maintain reservoir stability and ensure efficient and sustained stimulation from acidization treatments. In this paper, the stability of unconsolidated sandstone reservoirs and the acid dissolution plugging system, along with the technological methods for stabilizing sand bodies, are studied through mineral component analysis, acid dissolution experiments, core immersion experiments, and other laboratory tests. The principle of synergistic effects between different acids is applied to achieve "high-efficiency scale dissolution and low sandstone dissolution." Three key indicators of dispersion, sand dissolution rate, and scale dissolution rate were created. The acid plugging solution formula of "controlled dispersion and differentiated dissolution" was developed to address these indicators. Laboratory tests have shown that the sandstone is predominantly composed of quartz and clay minerals, with the latter mainly being illite. The primary constituent of the wellbore blockage scale sample is magnesium carbonate, which exhibits nearly 100% solubility in acid. By adding a stabilizer prior to acid corrosion, the core's corrosion can be effectively mitigated, particle dispersion and migration can be controlled, and the rock structure's stability can be maintained. Laboratory evaluations indicate that the scale dissolution rate is greater than or equal to 95%, the sand dissolution rate is below 25%, and the system achieves a differentiated corrosion effect without dispersion for 24 h. Field tests demonstrate that the new acid solution plugging removal system enhances average well production and reduces operational costs. The system effectively mitigates the challenges of substantial sand production and reservoir dispersion, thereby furnishing a theoretical foundation and practical direction for acid plugging treatments in unconsolidated sandstone gas fields.

What problem does this paper attempt to address?

The paper aims to address the severe scaling and sand production issues encountered during the development of the Sebei Gas Field in the Qinghai-Tibet Oilfield. The Sebei Gas Field is located in the Sanhu Depression of the Qaidam Basin and is the main gas-producing area and key profit pillar of the Qinghai-Tibet Oilfield. The gas field is characterized by high clay content, poor lithology, interlayer flow of oil and gas, and easy sand production. The reservoir rocks are mainly argillaceous siltstones, primarily cemented by clay, which are relatively loose and prone to blockage. Traditional acidizing techniques are slow in effect and may even have negative impacts, leading to the dispersion of loose sandstones and exacerbating sand production. Therefore, it is particularly important to study the wellbore blockage mechanism and develop an acidizing and blockage removal system suitable for unconsolidated sandstone reservoirs. This system should not only alleviate gas well blockage damage but also maintain reservoir stability and ensure the effectiveness and sustainability of acidizing treatments. Through laboratory tests such as mineral composition analysis, acid dissolution experiments, and core soaking experiments, this paper studies the stability of unconsolidated sandstone reservoirs and their acid dissolution blockage systems. It proposes the principle of synergistic effects between different acids to achieve "efficient scale dissolution and low sand dissolution." Finally, a formula for an acid blockage removal solution with "controlled dispersion and differential dissolution" was developed to address three key indicators: dispersion, sand dissolution rate, and scale dissolution rate. Laboratory tests show that the sandstone is mainly composed of quartz and clay minerals, with illite being the primary clay mineral. The main component of the wellbore blockage scale samples is magnesium carbonate, which is almost completely dissolved in acid. By adding a stabilizer before acid corrosion, the corrosion of the core can be effectively alleviated, controlling particle dispersion and migration, and maintaining the stability of the rock structure. Laboratory evaluations indicate that the scale dissolution rate is greater than or equal to 95%, the sand dissolution rate is less than 25%, and the system achieves non-dispersive differential corrosion effects within 24 hours. Field tests show that the new acid dissolution blockage removal system improves average well production and reduces operating costs, effectively mitigating the issues of significant sand production and reservoir dispersion. This provides a theoretical basis and practical direction for acid dissolution blockage removal treatments in unconsolidated sandstone gas fields.

Study on Stable Loose Sandstone Reservoir and Corresponding Acidizing Technology

Application and Study of Fine-Silty Sand Control Technique for Unconsolidation Quaternary Sand Gas Reservoir, Sebei Qinghai

STUDY ON SAND PRODUCTION IN A NATURAL GAS HYDRATE PRODUCTION WELL

Experimental Study of the Fluid-rock Interactions between CO2-rich Fluid and Sandstone and Its Application:A Case Study of the Upper Permian Longtan Formation in the Huangqiao Oil and Gas Reserviors

Study on the Cleanup Mechanism of Microemulsion Acid Based on Microfluidic Experiment

Optimization of Acid Fracturing Process for Carbonate Reservoirs in Daniudi Gas Field

Study on reservoir damage during acidizing for high-temperature and ultra-deep tight sandstone

Laboratory Study on a New Surfactant/Polymer Formulation for Both Sandstone and Carbonate Reservoir

Novel Sandstone Stimulation Using Thermochemical Fluid: Successful Field Application

Acid-Soluble Drilling Fluid in the Northern Carbonate Reservoir of the Yishan Slope in the Ordos Basin

Research and Application of Wellbore Fixed-Point Acidification Unblocking Technology for High Temperature and High Pressure Gas Wells

Study on the Performance Degradation of Sandstone under Acidification

Development and Application of Foam Generator for Low Pressure Loose Sandstone Gas Well

Wettability alteration and mitigating aqueous phase trapping damage in tight gas sandstone reservoirs using mixed cationic surfactant/nonionic fluoro-surfactant solution

Consolidation-acidizing experiments on methane natural gas sediment skeleton

Evaluation of the Percolation Sensitivity of Loose Sandstone Using Digital Core Technology

Study on the Mechanism of Wellbore Blockage and Scaling Trend Prediction of Keshen Block

Optimization of Fracturing Fluid and Retarded Acid for Stimulating Tight Naturally Fractured Bedrock Reservoirs.

Mechanism of Salt Precipitation Blockage in Low-Producing Gas Wells and the Method of Acidification Blockage Removal

Sand control during gas production from marine hydrate reservoirs by using microbial-induced carbonate precipitation technology: A feasibility study