Abstract:The damping of spruce wood is analysed at different moisture content levels for the first three vibration modes of tangentially and radially vibrating samples. Two methods were used to determine the damping. The first was the vibration envelope fitting as an improved version of the well-known logarithmic decrement, and the second was the newer and recently increasingly used wavelet transform. Both methods showed that the damping of spruce wood first decreases and then increases with moisture content, with the damping in the first vibration mode being about 9% higher in the radial direction than in the tangential direction. In the second and third vibration modes, the damping in the tangential direction was higher than in the radial direction by about 10% and 8.8%, respectively. The measured damping factors from the envelope fitting had, on average, 15.9% higher values than those from the wavelet transform. It can be concluded from the results that the wavelet transform is more accurate for determining the damping factor, as it enables the decoupling of multi-degree of freedom systems if mode coupling is present.
What problem does this paper attempt to address?
### Problems the Paper Attempts to Solve
This paper aims to investigate the damping characteristics of spruce wood (*Picea abies*) under different moisture content conditions in the first three vibration modes. Specifically, the authors used two methods to determine the damping coefficient of the wood: an improved logarithmic decrement method (by fitting the vibration envelope) and the increasingly popular Continuous Wavelet Transform (CWT). The purpose of these two methods is to better understand the damping behavior of wood under different moisture content conditions and to evaluate which method is more accurate in determining the damping coefficient.
### Research Background
Wood, as a widely used material, has applications in various fields such as construction and musical instruments. Therefore, understanding its mechanical properties and damping characteristics is crucial. Damping refers to the material's ability to dissipate energy during vibration and can be divided into hysteretic damping and viscous damping. The damping characteristics of wood are influenced by various factors, including moisture content and temperature. Previous studies have shown that the damping characteristics of wood change with these factors, but most studies mainly use the logarithmic decrement method or the 3 dB method to determine the damping coefficient, which are not accurate enough when dealing with coupled systems.
### Research Objectives
1. **Determine the damping characteristics of wood under different moisture content conditions**: Experimentally measure the damping coefficient of spruce wood under different moisture content conditions, particularly in the first three bending vibration modes.
2. **Compare the accuracy of different methods**: Compare the accuracy of the logarithmic decrement method and the wavelet transform method in determining the damping coefficient, especially for coupled systems.
3. **Validate the effectiveness of the wavelet transform method**: Confirm the superiority of the wavelet transform method in determining the damping characteristics of wood, especially when dealing with multi-degree-of-freedom systems.
### Main Findings
- **Trend of damping characteristics**: The damping coefficient of wood decreases first and then increases with the increase in moisture content. In the first vibration mode, the radial direction damping is about 9% higher than the tangential direction, while in the second and third vibration modes, the tangential direction damping is about 10% and 8.8% higher than the radial direction, respectively.
- **Method comparison**: The damping coefficient determined by the logarithmic decrement method is on average 15.9% higher than that determined by the wavelet transform method. The wavelet transform method is more accurate in determining the damping coefficient because it can decouple modal coupling in multi-degree-of-freedom systems.
- **Statistical analysis**: Statistical analysis results show that the method of determining the damping coefficient, the vibration direction of the sample, and the moisture content significantly affect the damping coefficient. In the radial direction, there is no significant difference between the logarithmic decrement method and the wavelet transform method at 7.2% and 9.9% moisture content, but there is a significant difference at 13.3% and 19.1% moisture content. In the tangential direction, there is no significant difference between the two methods at all moisture content levels.
### Conclusion
Through experiments and statistical analysis, this study verifies the superiority of the wavelet transform method in determining the damping coefficient of wood, especially when dealing with multi-degree-of-freedom systems. This provides a more accurate method for future research, helping to better understand and apply the damping characteristics of wood.