Abstract:This paper explores the feasibility of an intuitive solution torque density for the existing brushless doubly-fed generator by dual-stator and cage-barrier rotor structure, so as to better adapt to the offshore wind power generation. The torque density of electrical machine is related to the key design parameters, such as the machine main dimensions, slot-pole combinations, coupling between stator and rotor, and nonmagnetic ring thickness. According to working principles and design requirements of electrical machine, the dual-stator brushless doubly-fed wind power generator (DSBDFWPG) with cage-barrier rotor is designed, and the key parameters relating to torque density are analyzed and discussed. Meanwhile, the main parameters of electrical machine are optimized by Taguchi method, such as air-gap length and nonmagnetic ring thickness. On this basis, the performance parameters of DSBDFWPG are analyzed by finite element method, which is verified by experimental tests. Through analysis of the results, not only the design requirements are satisfied by the DSBDFWPG, but also the correctness and rationality of machine design method can also be verified. Finally, the torque density and other aspects of designed DSBDFWPG are compared with dual-stator brushless doubly-fed induction generator, doubly-fed induction generator, asynchronous machine, and brushless doubly-fed generator; it demonstrates the torque density improvement of the studied machine with its significance and value.

An Asymmetric-Primary Axis-Flux Hybrid-Excitation Generator for the Vertical Axis Wind Turbine

Design and Analysis of a Superconducting Induction Magnetic Levitation Device for Hydraulic Turbo-Generator

Enhanced Ventilation and Thermal Performance by Skewed Through Holes on Rotor Yoke in Forced Air-Cooled Permanent Magnet Wind Generators

Phase–amplitude Model for Doubly Fed Induction Generators

Research On An Axial Maglev Device With Primary Superconductive Coils For A 1000 Mw Hydraulic Generator Set

Control research on axial-flux hybrid-excitation generator for offshore vertical axis maglev wind turbine

Operation Control and Space Vector Analysis on Doubly Fed Wind Power Generator

Design and Fem Analysis of A High Efficiency Axial-Flux Brushless Dc Motor for Flywheel System

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Design and Analysis of Axial Flux Permanent Magnet Generator for Direct-Driven Wind Turbines

Axial Modular Variable Flux Reluctance Starter Generator With Step-Staggered Rotor to Eliminate Phase-to-Phase Coupling

Design and Analysis of an Air-Cored Axial Flux Permanent Magnet Generator for Small Wind Power Application

Torque Oscillation Suppression of DFIG-based Wind Turbines under Unbalanced and Distorted Grid Voltage Conditions

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

A New Hybrid Excitation Machine with Dual-Stator Single-Rotor Axial-Flux Topology for Electric Vehicle Traction Application

Electromagnetic Design And Optimization Of Dual-Stator Brushless Doubly-Fed Wind Power Generator With Cage-Barrier Rotor

Design and Analysis of a Cost-Effective Magnetless Multiphase Flux-Reversal DC-Field Machine for Wind Power Generation

Design of a Dual-Stator Superconducting Permanent Magnet Wind Power Generator with Different Rotor Configuration

Development of Vertical-Axis Wind Turbine with Asynchronous Generator Interconnected to the Electric Network

A Counter-Rotating Double-Rotor Axial Flux Permanent Magnet Generator for Wind Turbine Applications: Design, Simulation, and Prototyping