Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

Core Loss Analysis of Axial Modular Flux Switching Permanent Magnet Machine Considering the Impact of No‐Magnetic Ring

Analytical Modeling Of Eddy Current Loss In Retaining Sleeve Of Surface-Mounted Pm Machines Accounting For Influence Of Slot Opening

Novel Modular-Rotor Switched-Flux Permanent Magnet Machines

Magnetic Circuit Modeling of Dual-Armature Flux-Switching Permanent Magnet Machine

Comparison Between Dual-Armature Linear Switched Flux Permanent Magnet Machine and Linear Surface-Mounted Permanent Magnet Machine Considering Thermal Conditions

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.

Optimization and Comparison of Dual-Armature Flux-Switching Permanent Magnet Machines with Different Stator Core Shapes

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Analytical Model for Predicting Magnet Loss of Surface-Mounted Permanent Magnet Machines Accounting for Slotting Effect and Load

Losses Analysis of Soft Magnetic Ring Core under Sinusoidal Pulse Width Modulation (SPWM) and Space Vector Pulse Width Modulation (SVPWM) Excitations

Influence of Slot Flux Leakage on the Current Distribution in Axial Flux Machine Windings

Performance Analysis of a Coreless Axial-Flux Permanent Magnet Machine with Halbach PM Arrangement

Core Loss Analysis of Transverse Flux Tubular Motor in Different Motion Modes

Comparative Study of Novel Doubly-Fed Linear Switched Flux Permanent Magnet Machines with Different Primary Structures

Analysis of Winding MMF and Loss for Axial Flux PMSM with FSCW Layout and YASA Topology

Comparative Analysis of Loss Distribution in Permanent Magnet Synchronous Machine and Vernier Machine

Analysis of Electric Motor Magnetic Core Loss under Axial Mechanical Stress

Core Loss Analysis of Transverse Flux Tubular Motor in Variable-Speed Reciprocating Periodic Motion Mode

Loss Analysis and Experiment of Fractional-Slot Concentrated-Winding Axial Flux PMSM for EV Applications

Study on AC Copper Losses in an Air-Cored Axial Flux Permanent Magnet Electrical Machine with Flat Wires