Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Leakage Flux Adjustment and Flux Field Optimization for Coreless Axial Flux Permanent Magnet Synchronous Machine Based on U-shaped Iron

Magnetic Circuit Modeling of Dual-Armature Flux-Switching Permanent Magnet Machine

Optimization and Comparison of Dual-Armature Flux-Switching Permanent Magnet Machines with Different Stator Core Shapes

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Quasi-3-D Analytical Method of Open-Circuit Magnetic Field for Yokeless and Segmented Armature Machine

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Optimal Designs of Wound Field Switched Flux Machines with Different DC Windings Configurations

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

Flux Weakening Control Of Interior Permanent Magnet Synchronous Machine To Improve Torque Performance

Influence of Slot Flux Leakage on the Current Distribution in Axial Flux Machine Windings

Improved Coreless Axial Flux Permanent-Magnet Machine with Non-uniformly Distributed Winding

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Comparative Study of Flux‐Switching Permanent Magnet Machine with C‐ and E‐Shaped Cores Based on Magnetic Field Modulation Theory

Performance Investigation of Odd Primary Pole Linear Switched-Flux Pm Machine with Mechanical Flux Adjuster

Optimization Design of E-Core Hybrid-Excitation Linear Switched-Flux Permanent Magnet Machine

Flux-Regulation Principle and Performance Analysis of a Novel Axial Partitioned Stator Hybrid-Excitation Flux-Switching Machine Using Parallel Magnetic Circuit

Study on AC Copper Losses in an Air-Cored Axial Flux Permanent Magnet Electrical Machine with Flat Wires

Ultra‐fast finite element analysis of coreless axial flux permanent magnet synchronous machines

Design and Quantitative Analysis of Asymmetric Flux Reversal Permanent Magnet Linear Machine with Reduced Leakage Flux

Investigation of Asymmetric Consequent-Pole Hybrid Excited Flux Reversal Machines