Abstract:Electrospinning is a simple, versatile technique for fabricating fibrous nanomaterials with the desirable features of extremely high porosities and large surface areas. Using emulsion electrospinning, polytetrafluoroethylene/polyethene oxide (PTFE/PEO) membranes were fabricated, followed by a sintering process to obtain pure PTFE fibrous membranes, which were further utilized against a polyamide 6 (PA6) membrane for vertical contact-mode triboelectric nanogenerators (TENGs). Electrostatic force microscopy (EFM) measurements of the sintered electrospun PTFE membranes revealed the presence of both positive and negative surface charges owing to the transfer of positive charge from PEO which was further corroborated by FTIR measurements. To enhance the ensuing triboelectric surface charge, a facile negative charge-injection process was carried out onto the electrospun (ES) PTFE subsequently. The fabricated TENG gave a stabilized peak-to-peak open-circuit voltage (V-oc) of up to similar to 900 V, a short-circuit current density (J(sc)) of similar to 20 mA m(-2), and a corresponding charge density of similar to 149 mu C m(-2), which are similar to 12, 14, and 11 times higher than the corresponding values prior to the ion-injection treatment. This increase in the surface charge density is caused by the inversion of positive surface charges with the simultaneous increase in the negative surface charge on the PTFE surface, which was confirmed by using EFM measurements. The negative charge injection led to an enhanced power output density of similar to 9 W m(-2) with high stability as confirmed from the continuous operation of the ion-injected PTFE/PA6 TENG for 30 000 operation cycles, without any significant reduction in the output. The work thus introduces a relatively simple, cost-effective, and environmentally friendly technique for fabricating fibrous fluoropolymer polymer membranes with high thermal/chemical resistance in TENG field and a direct ion-injection method which is able to dramatically improve the surface negative charge density of the PTFE fibrous membranes.

Triboelectric polymer with excellent enhanced electrical output performance over a wide temperature range

Tailoring P-N Conversion in All-solid-state Polymer Composites with A Record Ionic Thermopower

Enhancement of Patterned Triboelectric Output Performance by an Interfacial Polymer Layer for Energy Harvesting Application

Triboelectric Polymer with High Thermal Charge Stability for Harvesting Energy from 200 °C Flowing Air

Elaborately fabricated polytetrafluoroethylene film exhibiting superior high-temperature energy storage performance

Superior triboelectric polymer based on solid-state polymer forging

Dynamic Thermostable Cellulosic Triboelectric Materials from Multilevel‐Non‐Covalent Interactions

Preparation and Characterization of Amide-Containing Polyimide Films with Enhanced Tribopositivity for Triboelectric Nanogenerators to Harvest Energy at Elevated Temperatures

Harsh Environmental-Tolerant and High-Performance Triboelectric Nanogenerator Based on Nanofiber/Microsphere Hybrid Membranes

Flexible stretchable tribo-negative films with exceptional output performance for high-temperature energy harvesting and self-powered sensor

Enhanced Performance Triboelectric Nanogenerators Based on Solid Polymer Electrolytes with Different Concentrations of Cations

High-performance and robust high-temperature polymer electrolyte membranes with moderate microphase separation by implementation of terphenyl-based polymers

Asymmetric permittivity enhanced bilayer polycaprolactone nanofiber with superior inner interfacial polarization and charge retention for high-output and humidity-resistant triboelectric nanogenerators

Highly Moisture-Resistant Flexible Thin-Film-Based Triboelectric Nanogenerator for Environmental Energy Harvesting and Self-Powered Tactile Sensing

Outstanding High-Temperature Capacitive Performance in All-Organic Dielectrics Enabled by Synergistic Optimization of Molecular Traps and Aggregation Structures.

Modulating polarization and carrier migration characteristics via constructing sandwich-structured heterojunction interfaces for achieving excellent high-temperature energy storage properties in polymer nanocomposites

Emulsion Electrospinning of Polytetrafluoroethylene (PTFE) Nanofibrous Membranes for High-Performance Triboelectric Nanogenerators.

Large and Tunable Ranking Shift in Triboelectric Series of Polymers by Introducing Phthalazinone Moieties

Compressible Polymer Composites with Enhanced Dielectric Temperature Stability

Improved Breakdown Strength and Energy Density of All-Organic Polymer Dielectrics at Elevated Temperature

Electrospun fluorinated poly(aryl ether) fiber membrane: preparation and high triboelectric output performance