Abstract:Offshore wind turbines are subjected to cyclic loading conditions during their operational lifespan which is typically between 20 and 25 years. An important issue in fatigue design and integrity assessment of offshore wind turbine foundations is the examination of the long-term fatigue and corrosion-fatigue behaviour of steel structures in the high cycle region. High cycle fatigue tests, particularly at low frequencies in a seawater environment, are time-consuming and costly. Therefore, there is an essential need to perform accelerated tests to predict the long-term behaviour of the structures under realistic operational loading conditions. In this work, the existing fatigue acceleration mechanisms have been reviewed and a novel methodology has been proposed for accelerated testing and analysis of fatigue data in different environments (i.e. air, salt-spray and seawater) at higher temperatures. Two distinct equations have been developed and proposed for the calibration and prediction of S-N fatigue life and crack growth behaviour of steels in different environments. The proposed methodology has been validated through comparison with the existing data in the literature and predictions have been made at operational temperatures using high temperature data. The proposed approach is relatively simple to calibrate for a material of interest and enables accelerating S-N fatigue and crack growth testing of the examined materials by a factor of two and three, respectively. The proposed methodology and the obtained results have been discussed in terms of the need for accelerated testing for fatigue design and integrity assessment of offshore wind monopiles, especially those which are close to the end of initial design life and need a comprehensive engineering analysis for life extension or decommissioning.

Mechanical Properties of Steel for Floating Offshore Platforms under Static and Cyclic Loading

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

Mechanical Performance Analysis of Offshore Platform Based on the Modified Generalized Constitutive Model of Time-Varying Corrosion-Damaged Steel

STRESS TEST ANALYSIS OF 15×10~4 m~3 FLOATING ROOF TANK MADE OF HOME-MADE STEEL PLATE

Fatigue strength of tubular welded connections in offshore floating platforms

Hysteresis behavior of EQ56 high strength steel: Experimental tests and FE simulation

Experimental Study on Low-Cycle Fatigue Characteristics of Marine Structural Steel

Experimental study on the fatigue failure mechanism of key joints in deepwater semi-submersible platform structures

An accelerated corrosion-fatigue testing methodology for offshore wind applications

Behavior of High Strength Structural Steel at Elevated Temperatures

High-cycle rotating-bending fatigue performance of S690QL welded joints

Mechanical Behavior of Q460 High-Strength Steel under Low-Cycle Fatigue Loading

Static and Fatigue Behavior of Steel-Concrete Composite Beams with Corroded Studs

Monotonic and fatigue behavior of steel-concrete composite beams subjected to corrosion

Fatige damage and corrosion damage and life prediction of the leg of offshore production platform in service

Experimental study on the mechanical properties and ultimate strength of accelerated corrosion on hull plates

Corrosion Behavior of Rusted 550 Mpa Grade Offshore Platform Steel

Experimental research on the fatigue crack growth behaviour of Q420C

Effects of corrosion on the fatigue fracture behavior of 4140 steel for offshore wind turbine bolts

In-Service Brittle Fracture Resistance Degradation of Steel in a Ship-to-Shore Portal Crane

Status and Development Trends of Offshore Platform Steels Ⅲ