Abstract:One of the most promising ways to significantly reduce greenhouse gases emissions, while carbon-free energy sources are developed, is Carbon Capture and Storage (CCS). Non-isothermal effects play a major role in all stages of CCS. In this paper, we review the literature on thermal effects related to CCS, which is receiving an increasing interest as a result of the awareness that the comprehension of non-isothermal processes is crucial for a successful deployment of CCS projects. We start by reviewing CO2 transport, which connects the regions where CO2 is captured with suitable geostorage sites. The optimal conditions for CO2 transport, both onshore (through pipelines) and offshore (through pipelines or ships), are such that CO2 stays in liquid state. To minimize costs, CO2 should ideally be injected at the wellhead in similar pressure and temperature conditions as it is delivered by transport. To optimize the injection conditions, coupled wellbore and reservoir simulators that solve the strongly non-linear problem of CO2 pressure, temperature and density within the wellbore and non-isothermal two-phase flow within the storage formation have been developed. CO2 in its way down the injection well heats up due to compression and friction at a lower rate than the geothermal gradient, and thus, reaches the storage formation at a lower temperature than that of the rock. Inside the storage formation, CO2 injection induces temperature changes due to the advection of the cool injected CO2, the Joule-Thomson cooling effect, endothermic water vaporization and exothermic CO2 dissolution. These thermal effects lead to thermo-hydro-mechanical-chemical coupled processes with non-trivial interpretations. These coupled processes also play a relevant role in “Utilization” options that may provide an added value to the injected CO2, such as Enhanced Oil Recovery (EOR), Enhanced Coal Bed Methane (ECBM) and geothermal energy extraction combined with CO2 storage. If the injected CO2 leaks through faults, the caprock or wellbores, strong cooling will occur due to the expansion of CO2 as pressure decreases with depth. Finally, we conclude by identifying research gaps and challenges of thermal effects related to CCS.

Geothermal harvest from a CO 2 storage Reservoir: Coupled impacts of geological channel length and horizontal well configuration

Numerical investigation of the influence of vertical permeability heterogeneity in stratified formation and of injection/production well perforation placement on CO2 geological storage with enhanced CH4 recovery

Influence of Reservoir Heterogeneity on Simultaneous Geothermal Energy Extraction and CO2 Storage

Experimental study on the effect of CO2 storage on the reservoir permeability in a CO2-based enhanced geothermal system

Optimizing CO2-Water Injection Ratio in Heterogeneous Reservoirs: Implications for CO2 Geo-Storage

Effects of seepage flow patterns with different wellbore layout on the heat transfer and power generation performance of enhanced geothermal system

Technical analysis of a novel economically mixed CO 2 -Water enhanced geothermal system

Heat Production Performance from an Enhanced Geothermal System (EGS) Using CO2 as the Working Fluid

Numerical Study of the Influence of Injection/Production Well Perforation Location on Co2-EGS System

The use of supercritical CO2 in deep geothermal reservoirs as a working fluid: Insights from coupled THMC modeling

Thermal Impact of Co2 Injection on Geomechanical Response at the Futuregen 2.0 Site: A Three-Dimensional Thermo-Geomechanical Approach

Numerical investigation of the influences of geological controlling factors on heat extraction from hydrothermal reservoirs by CO2 recycling

The Feasibility of Heat Extraction Using CO2 in the Carbonate Reservoir in Shandong Province, China

Integrated technological and economic feasibility comparisons of enhanced geothermal systems associated with carbon storage

Optimizing high-temperature geothermal extraction through THM coupling: insights from SC-CO 2 enhanced modeling

Heat extraction analysis of a novel multilateral-well coaxial closed-loop geothermal system

Integrated Raw Material Approach to Sustainable Geothermal Energy Production: Harnessing CO2 for Enhanced Resource Utilization

System and multi-physics coupling model of liquid-CO 2 injection on CO 2 storage with enhanced gas recovery (CSEGR) framework

Thermal effects on geologic carbon storage

Permeability heterogeneity effects on density-driven CO 2 natural convection and carbon sequestration efficiency

Parametric study of the geothermal exploitation performance from a HDR reservoir through multilateral horizontal wells: The Qiabuqia geothermal area, Gonghe Basin