Abstract:The initial state of hydrocarbon mixtures in petroleum reservoirs is the result of equilibrium among several forces, the most important of which are the chemical forces arising from chemical potential gradients of the molecular species in the petroleum accumulation, the gravitational force arising from the gravitational acceleration, and the thermal diffusion forces arising from temperature gradients. The equilibrium among these forces determines the state of pressure and a compositional gradient and the creation of a gas oil contact (GOC) in a stationary reservoir along with the changes in other physical properties. Accurate modeling of these changes in the development of a proper stationary model for the reservoir simulation initialization leads to more realistic predictions of the future behavior of petroleum reservoirs. This is important especially when phase behavior is important in designing, modeling, and predicting the performance of the processes used to maximize the oil recovery, such as in dealing with a gas condensate reservoir or when miscible displacement is to be done in the enhanced oil recovery (EOR) stage of the reservoir life. In this study, we consider the equilibrium among chemical, gravitational and thermal diffusion forces to predict the changes in reservoir fluid composition and pressure and also to predict the location of a possible GOC in a reservoir. Additionally, we develop a simple model to predict the change of the plus-fraction molecular weight (MW) in a non isothermal reservoir using continuous thermodynamics and the theory of irreversible processes. We propose a method not only to tune the equation of state (EOS) versus the measured PVT lab data for one fluid sample but also to accurately model the depths of the GOC and other fluid samples and their PVT lab data in order to determine which sample is representative of the reservoir fluid and also to develop an EOS model that can work for every fluid in the reservoir, not just a single point. In two case studies, we validate our calculation procedure for the general compositional gradient, GOC detection, and the plus-fraction MW change in the reservoir against two data sets from the literature. The computational results show that the model developed works satisfactorily to predict the fluid changes in these two reservoirs. Subsequently, we also report the results of a series of sensitivity analysis tests to show the factors affecting the compositional gradient calculations and present examples of abnormal fluid distributions in a hydrocarbon fluid column where the fluid becomes denser toward the top of the column or the changes in fluid properties are highly nonlinear with respect to depth in the reservoir.

Modifying the gas-oil ratio and water cut of a PVT lookup table using correlations for fluid volatility

A method to estimate well flowing gas-oil ratio and composition using pressure and temperature measurements across a production choke, a seed composition of oil and gas, and a thermodynamic simulator

Multi-level delumping strategy for thermal enhanced oil recovery simulations at low pressure

Study on Calculation Method for Wellbore Pressure in Gas Wells with Large Liquid Production

Phase-Behavior Modeling of Hydrocarbon Fluids in Nanopores Using PR-EOS Coupled with a Modified Young-Laplace Equation

Analytical Model for Rate Transient Analysis in Low-Permeability Volatile Oil Reservoirs

Correlation for Viscosities of Pure Liquids at High Pressures

A simple and accurate model to predict pressure drop in vertical gas wells

Selecting an analytical model for describing the viscosity of an oil-water emulsion in the Aspen HYSYS program

Parametric and Nonparametric Approaches of Reid Vapor Pressure Prediction for Gasoline Containing Oxygenates: A Comparative Analysis Using Partial Least Squares, Nonlinear, and LOWESS Regression Modelling Strategies with Physical Properties

Effects of the Characterization Methods of Heptane Plus Components (C7+) on the Phase Behavior of Volatile Fluids

Chemical–Gravity–Thermal Diffusion Equilibrium in Two-Phase Non-isothermal Petroleum Reservoirs

Prediction of Gas/Water Relative Permeability Using the GWO-LSSVM Model Under HTHP Condition

Improved Fluids Characterization Model During Gas Huff-n-Puff EOR Processes in Unconventional Reservoirs

Dynamic Simulation of a Gas and Oil Separation Plant with Focus on the Water Output Quality

Thermophysical Properties of R32/advanced PVE Mixture and Parametric Analysis on Oil Transport Characteristic of Compressor Suction Line

Quantification of preferential and mutual mass transfer of gases-light oil systems at high pressures and elevated temperatures by dynamic volume analysis

A Simple Generic Model for Estimating Saturated Vapor Pressure

Vapor-liquid equilibrium calculations at specified composition, density and temperature with the perturbed chain statistical associating fluid theory (PC-SAFT) equation of state

Experimental and Modeling Investigation on Gas-Liquid Two-Phase Flow in Horizontal Gas Wells

Analysis of the Impact of CO<SUB Align="right">2 Content on the Physical Properties of the Liquid Phase Mixtures in Oil Production Wells