Abstract:Amorphous oxide semiconductor (AOS) field-effect transistors (FETs) have been integrated with complementary metal-oxide-semiconductor (CMOS) circuitry in the back end of line (BEOL) CMOS process; they are promising devices creating new and various functionalities. Therefore, it is urgent to understand the physics determining their scalability and establish a physics-based model for a robust device design of AOS BEOL FETs. However, the advantage emphasized to date has been mainly an ultralow leakage current of these devices. A device modeling that comprehensively optimizes the threshold voltage (VT), the short-channel effect (SCE), the subthreshold swing (SS), and the field-effect mobility (µFE) of short-channel AOS FETs has been rarely reported. In this study, the device modeling of two-steps oxygen anneal-based submicron indium-gallium-zinc-oxide (IGZO) BEOL FET enabling short-channel effects suppression is proposed and experimentally demonstrated. Both the process parameters determining the SCE and the device physics related to the SCE are elucidated through our modeling and a technology computer-aided design (TCAD) simulation. In addition, the procedure of extracting the model parameters is concretely supplied. Noticeably, the proposed device model and simulation framework reproduce all of the measured current-voltage (I-V), VT roll-off, and drain-induced barrier lowering (DIBL) characteristics according to the changes in the oxygen (O) partial pressure during the deposition of IGZO film, device structure, and channel length. Moreover, the results of an analysis based on the proposed model and the extracted parameters indicate that the SCE of submicron AOS FETs is effectively suppressed when the locally high oxygen-concentration region is used. Applying the two-step oxygen annealing to the double-gate (DG) FET can form this region, the beneficial effect of which is also proven through experimental results; the immunity to SCE is improved as the O-content controlled according to the partial O pressure during oxygen annealing increases. Furthermore, it is found that the essential factors in the device optimization are the subgap density of states (DOS), the oxygen content-dependent diffusion length of either the oxygen vacancy (VO) or O, and the separation between the top-gate edge and the source-drain contact hole. Our modeling and simulation results make it feasible to comprehensively optimize the device characteristic parameters, such as VT, SCE, SS, and µFE, of the submicron AOS BEOL FETs by independently controlling the lateral profile of the concentrations of VO and O in two-step oxygen anneal process.

A Two‐Step Dry Etching Model for Non‐Uniform Etching Profile in Gate‐All‐Around Field‐Effect Transistor Manufacturing

Performance Comparison Between Si and Ge pDG-FETs for Different Channel Lengths Based on Hole Transport Simulation

Research on Integrated Trench Etching for Trench-Type Power MOSFET

Three-dimensional Modeling of Core-structured Field Effect Transistor

Study of Selective Dry Etching Effects of 15-Cycle Si0.7Ge0.3/Si Multilayer Structure in Gate-All-Around Transistor Process

Growth and Selective Etch of Phosphorus-Doped Silicon/Silicon-Germanium Multilayers Structures for Vertical Transistors Application

A Comprehensive Study of NF3-Based Selective Etching Processes: Application to the Fabrication of Vertically Stacked Horizontal Gate-All-around Si Nanosheet Transistors

Strained Si0.2Ge0.8/Ge multilayer Stacks Epitaxially Grown on a Low-/High-Temperature Ge Buffer Layer and Selective Wet-Etching of Germanium

Study of Inner Spacer Module Process for Gate All Around Field Effect Transsistors

Finfet Gate Etch Towards 16nm Node CMOS Technology

Improved Analytical Model of Surface Potential with Modified Boundary Conditions for Double Gate Tunnel FETs.

Investigation on Ge0.8Si0.2-Selective Atomic Layer Wet-Etching of Ge for Vertical Gate-All-Around Nanodevice

(Digital Presentation) Uniformity and Profile Improvement of Fin Etching Process at Wafer Extreme Edge for Finfet Mass Production

Device modeling of two-steps oxygen anneal-based submicron InGaZnO back-end-of-line field-effect transistor enabling short-channel effects suppression

Floating Gate Etch Profile Control for Nand Flash Memory

Fabrication and selective wet etching of Si0.2Ge0.8/Ge multilayer for Si0.2Ge0.8 channel gate-all-around MOSFETs

Efficient ab initio analysis of quantum confinement and band structure effects in ultra-scaled Si1−xGex gate-all-around and fin field-effect transistors for sub-10 nm technology nodes

Investigation on Ge 0.8 Si 0.2 -Selective Atomic Layer Wet-Etching of Ge for Vertical Gate-All-Around Nanodevice.

An Analytical Model of Gate-All-Around Heterojunction Tunneling FET

Study of Silicon Nitride Inner Spacer Formation in Process of Gate-all-around Nano-Transistors

Predictive and prospective calibrated TCAD to improve device performances in sub-20 nm gate length p-FinFETs