Abstract:Compressible flow past a circular cylinder at an inflow Reynolds number of 2 x 10 5 is numerically investigated by using a constrained large-eddy simulation (CLES) technique. Numerical simulation with adiabatic wall boundary condition and at a free-stream Mach number of 0.75 is conducted to validate and verify the performance of the present CLES method in predicting separated flows. Some typical and characteristic physical quantities, such as the drag coefficient, the root-mean-square lift fluctuations, the Strouhal number, the pressure and skin friction distributions around the cylinder, etc. are calculated and compared with previously reported experimental data, finer-grid large-eddy simulation (LES) data and those obtained in the present LES and detached-eddy simulation (DES) on coarse grids. It turns out that CLES is superior to DES in predicting such separated flow and that CLES can mimic the intricate shock wave dynamics quite well. Then, the effects of Mach number on the flow patterns and parameters such as the pressure, skin friction and drag coefficients, and the cylinder surface temperature are studied, with Mach number varying from 0.1 to 0.95. Non-monotonic behaviors of the pressure and skin friction distributions are observed with increasing Mach number and the minimum mean separation angle occurs at a subcritical Mach number of between 0.3 and 0.5. Additionally, the wall temperature effects on the thermodynamic and aerodynamic quantities are explored in a series of simulations using isothermal wall boundary conditions at three different wall temperatures. It is found that the flow separates earlier from the cylinder surface with a longer recirculation length in the wake and a higher pressure coefficient at the rear stagnation point for higher wall temperature. Moreover, the influences of different thermal wall boundary conditions on the flow field are gradually magnified from the front stagnation point to the rear stagnation point. Moreover, the influences of different thermal wall boundary conditions on the flow field are graduallymagnified from the front stagnation point to the rear stagnation point. It is inferred that the CLES approach in its current version is a useful and effective tool for simulating wall-bounded compressible turbulent flows with massive separations.

Large Eddy Simulation of Supersonic Flow in Ducts with Complex Cross-sections

Constrained Large-Eddy Simulation for Aerodynamics

Constrained Large-Eddy Simulation of Compressible Flow Past a Circular Cylinder

Compressible Flow Characteristics in Bent Duct with Constant Flow Section

Large-Eddy vs. Reynolds-Averaged Navier–Stokes Simulations of Flow and Heat Transfer in a U-Duct with Unsteady Flow Separation

Numerical study on air flow around an opening with large eddy simulation

Large eddy simulation of strut enhanced mixing for supersonic combustion

Fast and Accurate Prediction of Airflow and Drag Force for Duct Ventilation Using Wall-Modeled Large-Eddy Simulation

Large eddy simulation of free surface turbulent channel flow with heat transfer

Large Eddy Simulation of Supersonic Boundary Layer Transition over a Flat-Plate Based on the Spatial Mode

Turbulent Flow Simulation Using Large Eddy Simulation Combined with Characteristic-Based Split Scheme

Constrained Large-Eddy Simulation of Turbulent Flow and Heat Transfer in a Stationary Ribbed Duct

Large Eddy Simulation Investigation of S-shaped Intake Distortion and Swirl Characteristics

Large Eddy Simulation of a High Reynolds Number Turbulent Jet in Crossflow

Large Eddy Simulation of Unconfined Turbulent Swirling Flow

Reynolds Stress Constrained Large Eddy Simulation of Separation Flows in a U-duct

Numerical Simulation Of Flow And Heat Transfer With Large-Eddy Simulation In A Mixng T-Junction

Finite Element Analysis of Turbulent Flows Using Les and Dynamic Subgrid-Scale Models in Complex Geometries

Large Eddy Simulation on the Turbulent Heat Transfer of Supercritical Fluid

Numerical study of high speed jets in crossflow

Large eddy simulation of flows around a square cylinder