Abstract:Rechargeable Li–CO2 batteries offer a sustainable strategy for CO2 utilization and energy storage in an environmentally friendly way. However, the current Li–CO2 batteries are restrained by unsatisfactory electrochemical performance and lack of cost-effectiveness in practical application. Thus, developing low-cost and highly effective electrode materials is crucial. Inspired by the concept of high nickel and low cobalt content in the electrode material, ultrafine Co0.1Ni0.9Ox nanoparticles decorated on carbon nanotubes (Co0.1Ni0.9Ox/CNT) are first developed in this work. Through various characterization techniques, the effects of doping Co2+ cations on the properties and electrochemical performance are systematically studied. At a current density of 100 mA g–1, a battery with the Co0.1Ni0.9Ox/CNT electrode delivers a high capacity of 5871.41 mA h g–1 with a Coulombic efficiency of 92.91% and a low overpotential of 3.94 V with an energy efficiency of 68%. At a cutoff capacity of 500 mA h g–1, the battery based on the Co0.1Ni0.9Ox/CNT electrode can be easily operated for 50 cycles without the trace of capacity degradation, which is nearly twice more than those with the NiO/CNT and CNT electrodes. Compared with the NiO/CNT electrode, the Co0.1Ni0.9Ox/CNT electrode exhibits superior electrocatalytic activity in oxidation and evolution reactions of CO2, which results from doping Co2+ cations in the NiO lattice to improve the p-type electronic conductivity. In addition, the polymer-like discharge products affected by doping Co2+ provide better reaction interfaces, curtailing the overpotential and reducing the life span. The results enlighten new ideas of fabricating high-performance and cost-effective electrode materials for prolonging the cycling life of Li–CO2 batteries toward practical applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02655.TEM images of NiO/CNT; TG–DTG curves of NiO/CNT and Co0.1Ni0.9Ox/CNT; nitrogen adsorption–desorption isotherm with the pore-size distribution of CNTs and NiO/CNT; full discharge–charge curves of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT; capacity-limited discharge–charge curves of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT; XRD patterns of NiO/CNT and CNTs; EIS results of Co0.1Ni0.9Ox/CNT; and specific surface area and pore volume of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT (PDF)This article has not yet been cited by other publications.

Ni-Co Double Hydroxide Grown on Graphene Oxide for Enhancing Lithium Ion Storage

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Hierarchical MOF-derived Layered Fe3O4 QDs@C Imbedded on Graphene Sheets As a High-Performance Anode for Lithium-ion Storage

Citrate‐Assisted Growth of NiCo2O4 Nanosheets on Reduced Graphene Oxide for Highly Reversible Lithium Storage

Facile Hydrothermal Fabrication of an α-Ni(OH) 2 /N-Doped Reduced Graphene Oxide Nanohybrid as a High-Performance Anode Material for Lithium-Ion Batteries

Hierarchically Hollow and Porous NiO/NiCo 2 O 4 Nanoprisms Encapsulated in Graphene Oxide for Lithium Storage

Growth Of Ultrathin Znco2o4 Nanosheets On Reduced Graphene Oxide With Enhanced Lithium Storage Properties

Surface-engineering of Layered LiNi 0.815 Co 0.15 Al 0.035 O 2 Cathode Material for High-Energy and Stable Li-ion Batteries

Preparation, Lithium Storage Performance and Thermal Stability of Nickel‐Rich Layered LiNi0.815Co0.15Al0.035O2/RGO Composites

Synthesis of Hierarchical and Bridging Carbon-Coated LiMn0.9Fe0.1PO4 Nanostructure As Cathode Material with Improved Performance for Lithium Ion Battery

Graphene-Oxide-Coated CoP2@C Anode Enables High Capacity of Lithium-Ion Batteries

Hierarchically Hollow and Porous NiO/NiCo2O4 Nanoprisms Encapsulated in Graphene Oxide for Lithium Storage

Covalently Coupled Hybrid of Graphitic Carbon Nitride with Reduced Graphene Oxide As a Superior Performance Lithium-Ion Battery Anode.

Dual-carbon coupled Co5.47N composites for capacitive lithium-ion storage

Ultrafine Co-Doped NiO Nanoparticles Decorated on Carbon Nanotubes Improving the Electrochemical Performance and Cycling Stability of Li–CO 2 Batteries

Hollow sea urchin-like microspheres of the dual transition metal oxides NiO/Co 3 O 4 immobilized on rGO enhance lithium-ion battery cycling and rate performance

Controllable synthesis of carbon supported cobalt monoxide anode and high-voltage lithium cobalt oxide cathode with enhanced lithium-ion storage

Novel quadruple-shelled hollow Zn0.5Mn0.5Co2O4/RGO heterostructure enable rapid and stable lithium storage performance

Nickel-cobalt layered double hydroxide cathode materials with excellent cycle stability for nickel-metal hydride batteries

Strongly coupled hybrid ZnCo2O4 quantum dots/reduced graphene oxide with high-performance lithium storage capability

Rational Assembly of CoAl-Layered Double Hydroxide on Reduced Graphene Oxide with Enhanced Electrochemical Performance for Energy Storage