Abstract:With the massive discharge of industrial oily wastewater and the frequent occurrence of oil spills at sea in recent years, the fabrication of superhydrophobic and durable oil-absorbing materials is urgently required for oil recovery and disposal of oily water in practical applications. In this paper, ultralight, elastic, superhydrophobic and durable carbon fiber aerogels (CFAs) derived from sisal leaves were prepared via simple alkalization, bleaching, freeze-drying and carbonization. The prepared CFAs were characterized using X-ray diffraction, Fourier transform infrared spectroscopy, N2 adsorption–desorption, contact angle measurement and scanning electron microscopy. The as-prepared CFAs with 3D porous architectures and excellent flexibility under compression were found to be effective oil absorption material for various oils and organic solvents. Textural analyses showed that the CFAs consist of fiber morphologies with high porosity originating from vacancies between individual fibers. The nitrogen sorption analysis confirmed that the material is mesoporous with average pore diameter of 3.03 nm and Brunauer–Emmett–Teller surface area of 399.85 m2/g. The contact angle measurements revealed that CFAs show both superoleophilic and superhydrophobic properties simultaneously with an oil contact angle of 0° and a static water contact angle of 153 ± 1°, thus the aerogels possessed a good oil–water separation ability. Furthermore, the CFAs exhibited a superior absorption capacity in the range from 90 to 188 times of their own weight for different organic solvents and oils. After recycling 10 times, the CFAs still exhibit excellent oils absorption properties, as well as exhibit excellent stability under harsh conditions, showing that the CFAs has excellent reusability performance. This work provides a green strategy to utilize low-cost biomass as raw materials to fabricate superhydrophobic CFAs as an oil absorbent, which has great potential in application of disposal of oily water and environmental protection.

Highly efficient oil–water separation of superhydrophobic cellulose II aerogel based on dissolution and regeneration of cotton in lithium bromide system

Ultralight, Elastic, Magnetic and Superhydrophobic Cellulose Nanofibril Based Aerogel with Layer-Support Structure Designed for Both Excellent Oil-Water Separation and Efficient PM2.5 Removal

Preparation of micro-convex rough interface carbon aerogels with cellulose-lithium bromide (LiBr) molten salt hydrate gelled system and application of oil-water separation

Highly compressible and durable superhydrophobic cellulose aerogels for oil/water emulsion separation with high flux

Hydrophobic and magnetic fabrication of hydroxyethyl cellulose-lignin aerogel through ultrasound enhancement for efficient oil/water separation

A hydrophobic/oleophilic silica‐cellulose composite aerogel for oil–water separation

Facile fabrication of super-hydrophilic cellulose hydrogel-coated mesh using deep eutectic solvent for efficient gravity-driven oil/water separation

Lignin: Excellent hydrogel swelling promoter used in cellulose aerogel for efficient oil/water separation

Facile Fabrication of Superelastic, Hydrophobic and Hierarchical polydimethylsiloxane@nanocelluloses Aerogels for Durable Oil/Water Separation

Low temperature-resistant superhydrophobic and elastic cellulose aerogels derived from seaweed solid waste as efficient oil traps for oil/water separation

Natural microfibrils/regenerated cellulose-based carbon aerogel for highly efficient oil/water separation

Preparation of superhydrophobic cellulose aerogel sponge from waste paper and its application in oil-water separation

Superhydrophobic cellulose-nanofiber aerogels from waste cotton stalks for superior oil–water and emulsion separation

Ultralight super-hydrophobic carbon aerogels based on cellulose nanofibers/poly(vinyl alcohol)/graphene oxide (CNFs/PVA/GO) for highly effective oil–water separation

Fabrication of hydrophilic cellulose graft copolymer/SiO 2 coated mesh for efficient oil-water separation

One-pot fabrication of hydrophilic-oleophobic cellulose nanofiber-silane composite aerogels for selectively absorbing water from oil–water mixtures

Superhydrophobic, ultralight and flexible biomass carbon aerogels derived from sisal fibers for highly efficient oil–water separation

Highly compressible and hydrophobic nanofibrillated cellulose aerogels for cyclic oil/water separation

Facile fabrication of superhydrophobic wood aerogel by vapor deposition method for oil-water separation

Oil/water separation by super-hydrophobic wastepaper cellulose-candelilla wax cryogel: a circular material-based alternative

Preparation of high elastic bacterial cellulose aerogel through thermochemical vapor deposition catalyzed by solid acid for oil-water separation