Abstract:A simplified numerical method was proposed for computing the slip-line field, as well as the associated earth-pressure coefficient, in a cohesionless backfill with an inclined surface lying behind an inclined rough wall. The potential failure zone, in either active or passive cases, was divided into the Rankine zone, which was rigorously obtained by the theory of plasticity, and the transition zone being further divided into a series of triangular slices. Within the transition zone, the theoretical relationship between the inclination of the interslice force and that of the slip surface was established by satisfying the Mohr-Coulomb failure criterion, and equations involving the forces on a typical slice were formulated in accordance with the force and moment equilibrium conditions. An iterative procedure was presented for computing the lateral forces on the wall by adjusting the inclination of the slip surface until the stress condition on the upper boundary of the transition zone was satisfied, resulting in the two families of slip lines. Several examples demonstrate the slip-line field configurations, and the computed earth-pressure coefficients were found to agree fairly well with those of other numerical methods. Practical Applications The determination of earth pressures and the associated critical failure surface play an important role in the design of retaining walls and other problems of geotechnical engineering. Conventional methods are frequently used for this purpose, but the errors involved are sometimes unacceptably large in cases of inclined rough walls. Hence, certain numerical methods have been employed, which, despite their sophistication, have not yet approached exact solutions. This paper presents a simplified numerical procedure for approaching theoretical slip-line fields and earth-pressure coefficients for the most frequently encountered cases of inclined rough walls with inclined cohesionless backfills. With this method, no assumptions need to be made about the shape of the slip surface or the inclinations of the forces acting on the boundaries of the triangular slices, into which the potential slip zone is divided. Furthermore, both the stress equilibrium condition and the Mohr-Coulomb criterion were completely satisfied within the failure zone and on its boundaries. An effective iterative procedure was provided for determining the slip surface location, which converged rapidly, resulting in an approximately theoretical configuration of slip-line field and associated earth-pressure coefficient values if a sufficiently large number of triangular slices were employed.

Centrifuge and analytical modeling of counterweight retaining walls under translation mode

Computation of active earth pressure under non-limit state for retaining wall with mode of translation

CENTRIFUGAL MODEL TESTS ON HYDRAULIC HEAVE MECHANISM OF EXCAVATION IN COHESIVE SOIL WITH CONFINED WATER

Analysis Of Active Earth Pressure On Rigid Retaining Walls Considering Soil Arching

Theory of Earth Pressure Against Rigid Retaining Wall Based on Disturbed State Concept Model

Active earth pressures against rigid retaining walls with narrow cohesive backfill

Model Test on Active Earth Pressure in Sand Induced by the Movement of Retaining Wall

Calculation of earth pressure against rigid retaining wall rotating outward about base

Earth Pressure Against Rigid Retaining Wall Rotating about Top

Numerical analysis of active earth pressure on rigid retaining wall

Analytical Method for the Deformation-Based Design of Retaining Walls in Asymmetric Excavation

Centrifuge Modelling Of Active Earth Pressures

Development of Centrifuge Model Test Facility of Retaining Wall

New Method for Computing Slip-Line Fields and Earth-Pressure Coefficients in Cohesionless Backfills

Study of Passive Earth Pressures Against Translating Rigid Retaining Walls in Narrow Excavations

Active Earth Pressure of Narrow Backfill on Inverted T-Type Retaining Walls under Translation Mode

Experimental and Theoretical Study for a Displacement-Controlled Design Method of Embedded Cantilever Retaining Walls (Piles)

Semianalytical Solution for Earth Pressure of Narrow Granular Backfill with a Log-Spiral Failure Surface behind Retaining Walls under Translational Mode

Active earth pressure of narrow cohesive backfill on rigid retaining wall of rotation about the bottom

Theory of Earth Pressure Against Rigid Retaining Walls Considering Translational Movement Effect

Lateral Earth Pressure Considering the Displacement of a Rigid Retaining Wall