Abstract:The rural residences of Northwest China are characterized by a state of high energy consumption and low comfort due to the limited economic level and awareness of energy-saving compared with the urban residences. To remedy this, appropriate passive design strategies should be adopted first, in order to provide a design mode with low energy consumption and low cost for rural residences under the premise of thermal comfort. In this paper, taking Hanzhong region (Shaanxi Province, China) as an example, we establish a benchmark model based on a field survey and develop an optimization process by combining EnergyPlus simulation software, the MOBO optimization engine, and weighted sum method. The action mechanisms of passive design parameters, including the building orientation, length–width ratio, building envelope parameters, external shading system, and window–wall ratio, on heating, cooling, and total energy consumption are analyzed, and the quantitative relationships between single-parameter and energy consumption are established. Then, the mutually restricted indices of total energy consumption and initial investment cost are taken as optimization objectives, and 17 design parameters are selected as the optimization variables. The NSGA-II algorithm is adopted to conduct the multi-parameter, multi-objective optimization design for rural houses in Hanzhong area, through coupling of the EnergyPlus and MOBO software. In this way, Pareto solutions are obtained and the value distributions of the multi-objectives and design parameters are analyzed. Based on the actual requirements of decision-makers and using the weight method, three design schemes focusing on different performance tendencies are proposed. The results indicate that by using the proposed optimization process, the building energy consumption can be significantly reduced while taking initial investment costs into account, where the energy-saving rate is in the range of 31.9–61.5%. When the EC/IC ratio is 1:1, 2:1, and 1:2, the energy-saving rate can reach 51.5%, 57.8%, and 43.5%, respectively. It can provide a beneficial pattern for the energy-saving design and renovation of rural residences in Hanzhong area of China.

Net zero carbon rural integrated energy system design optimization based on the energy demand in temporal and spatial dimensions

Optimization configuration of regional integrated energy system based on standard module

Optimization of integrated energy system for low-carbon community considering the feasibility and application limitation

Design of renewable energy systems for near-zero energy residence in hot summer and cold winter zone

Passive Energy-Saving Optimal Design for Rural Residences of Hanzhong Region in Northwest China Based on Performance Simulation and Optimization Algorithm

Economic Optimal Operation of Integrated Rural Single Household Energy Systems

Uncertain parameters adjustable two-stage robust optimization of a rural housing integrated energy system considering biomass on-site utilization

Optimal design method and benefits research for a regional integrated energy system

A multi-objective approach to optimizing the geometry and envelope of rural dwellings for energy demand, thermal comfort, and daylight in cold regions of China: A case study of Shandong province

Multi-objective optimization of an integrated energy system against energy, supply-demand matching and exergo-environmental cost over the whole life-cycle

Performance Analysis of Zero-Emission Integrated Energy System for Low-Density Residential Building Clusters

Performance-Oriented Parametric Optimization Design for Energy Efficiency of Rural Residential Buildings: A Case Study from China's Hot Summer and Cold Winter Zone

Bi-level programming optimization method of rural integrated energy system based on coupling coordination degree of energy equipment

Multi-objective optimization design for rural houses in western zones of China

Research on Parametric Design Method of Solar Photovoltaic Utilization Potential of Nearly Zero-Energy High-Rise Residential Building Based on Genetic Algorithm

Optimal Planning of Urban Building-Type Integrated Energy Systems Considering Indoor Somatosensory Comfort and PV Consumption

Optimization of a solar-based integrated energy system considering interaction between generation, network, and demand side

Robust Capacity Optimization Methods for Integrated Energy Systems Considering Demand Response and Thermal Comfort

Optimal Scheduling of Source–Load Synergy in Rural Integrated Energy Systems Considering Complementary Biogas–Wind–Solar Utilization

Optimization of micro-energy network system based on environment, economy, and carbon emissions

Multi-time scale optimization study of integrated energy system considering dynamic energy hub and dual demand response