Abstract:The aim of this work was to develop a filtering biocidal polypropylene (PP) nonwoven textile structure to block and inactivate airborne bacteria and viruses. PP filters were functionalized with a cyclodextrin (CD)-polycarboxylic acid-crosslinked polymer (PP-CD) through a pad/dry/curing process, and were then activated by padding in an alkyl dimethyl benzalkonium chloride (ADBAC) solution. The textile finishing process parameters were optimized with the perspective of mass production, considering the threshold temperature necessary for provoking crosslinking and the limitation of the low thermal stability of PP. The use of an aqueous solution containing hydroxypropyl-β-cyclodextrin (HPβCD), 1,2,3,4-butanetetracarboxylic acid (BTCA), ammonium hypophosphite (AH), and a surfactant allowed immobilization of the optimal quantity of cyclodextrin polymer under curing for 5 minutes at 125 °C without affecting the nonwoven PP structure. The presence of CD drastically increased the sorption of ADBAC on the textiles. There was leaching of ADBAC at the first rinsing and then satisfactory fastness at the second and third rinsings, revealing adsorption mechanisms by weak physical interactions, ionic interactions, and inclusion of ADBAC inside the CD cavities. SEM revealed no clogging of the nonwoven pores, nor any increase in the air flow resistance, as evaluated by pressure drop measurements. The filtration efficiency of particulate matter PM3.0 and PM0.5 was moderately affected, in contrast to that of PM0.3, which greatly decreased due to the loss of the electrostatic charge of the filter upon the functionalization process. Bactericidal tests resulted in a reduction of 3 log10 against Staphylococcus aureus, and for virucidal tests on human coronavirus HCoV-229E, there was a reduction of 3.4 log10, with both strains undergoing 20 minutes of contact. Finally, the filter we developed is manufacturable by a scalable process, and because of its filtration and biocidal performances, it is a choice material as a self-disinfecting layer in the fabrication of facepiece respirators.

Polypropylene-Rendered Antiviral by Three-Dimensionally Surface-Grafted Poly( N -benzyl-4-vinylpyridinium bromide)

Cationic Polymer Coating That Rapidly Inactivates Bacteria and Resists Bacterial Adhesion

Tri‐functional Unit Groups Contained Polyurethane Composites with Excellent Antibacterial Property and Biocompatibility

Synthesis of antibacterial polypropylene film with surface immobilized polyvinylpyrrolidone-iodine complex

Antiviral functionalization of a polypropylene nonwoven textile structure as a self-decontaminating layer for respiratory masks

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Nonleaching Biocidal N-Halamine-Functionalized Polyamine-, Guanidine-, and Hydantoin-Based Coatings

Crystallization, Mechanical, and Antimicrobial Properties of Diallyl Cyanuric Derivative-Grafted Polypropylene

Aromatic Amide-Based Hindered Amine Derivative as an Efficient Nucleation Agent for Polypropylene within Antiaging and Rechargeable Antibacterial Performances

Covalent bonding of quaternary ammonium compounds and zwitterionic polymer functional layers on polydimethylsiloxane against Escherichia Coli adhesion

Virucidal N95 Respirator Face Masks via Ultrathin Surface-Grafted Quaternary Ammonium Polymer Coatings

A facile method to fabricate an antimicrobial coating based on poly(1-vinyl-3-allylimidazolium iodide) (PAVI) and poly(ethylene glycol) dimethyl acrylate (PEGDMA)

Hydrophilic and antimicrobial properties of acrylic acid and chitosan bigrafted polypropylene melt-blown nonwoven membrane immobilized with silver nanoparticles

Surface functionalization of polypropylene film via UV-induced photografting of N-vinylpyrrolidone/maleic anhydride binary monomers

Controlled Grafted Poly(quaternized-4-vinylpyridine-co-acrylic Acid) Brushes Attract Bacteria for Effective Antimicrobial Surfaces

Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone

Multifunctional polymeric guanidine and hydantoin halamines with broad biocidal activity

Surface Functionalization of Poly(N-Vinylpyrrolidone) onto Poly(Dimethylsiloxane) for Anti-Biofilm Application

Bactericidal and antifouling electrospun PVA nanofibers modified with a quaternary ammonium salt and zwitterionic sulfopropylbetaine

A hydrophilic and negatively charged zinc silicate glass powder for antibacterial and antiviral polypropylene composites

Preparation of Rechargeable Antibacterial Polypropylene/N-Halamine Materials Based on Melt Blending and Surface Segregation