Abstract:Additive manufacturing technique has become one of the more prominent manufacturing techniques over the years. The applications of this manufacturing technique are boundless as new process parameters of the operation affect the new structure of the components and give extended applications. The study experimentally investigates the effects of Ytterbium Laser System process parameters on the resultant microstructure of Ti-6Al-4V grade 5 alloy and reinforcement powders. The deposition process was conducted employing a 3 kW (CW) Ytterbium Laser System (YLS-2000-TR) machine, co-axial to the reinforcement powder. The laser scanning speed and power were varied between the intervals of 0.8–1.0 m/min and 900–1000 W. All other parameters kept constant were the rate of gas flow, the spot diameter, and the rate of powder flow. The composites (Ti-6Al-4V/Ti-Al-Si-Cu) produced by the DLMD technique were analysed using investigative techniques, namely, optical microscopy (OPM), scanning electron microscopy (SEM) aided with energy dispersive microscopy (EDS), X-ray diffraction analysis (XRD), microhardness testing, and corrosion rate analysis. From the analysis of the physical properties, the findings show that the geometric properties such as heat affected zone (HAZ) and dilution ratio of the composite samples were greatly impacted by the increase of the laser power of the DLMD technique, showing an increase in these attributes brought about by the interaction between the laser and the material. The addition of the copper (Cu) element enabled the movement of the copper (Cu) into the titanium (Ti) lattice structure resulting in the formation of beta titanium (β-Ti) microstructure. Increment 54.94% is associated with sample 5A which has the most enhanced microhardness of 770 HV<sub>1.0</sub>. Sample 6A had shown the most corrosion resistance improvement with 0.00062 mm/year equivalent to 31%.

Microstructure and corrosion evolution of additively manufactured aluminium alloy AA7075 as a function of ageing

Effect of heat treatment on microstructure, hardness and corrosion resistance of 7075 Al alloys fabricated by SLM

Comparative study on microstructure and electrochemical corrosion resistance of Al7075 alloy prepared by laser additive manufacturing and forging technology

Microstructural and Mechanical Characterization of the Aging Response of Wrought 6156 (Al-Mg-Si) Aluminum Alloy

Electrochemical Behavior of Additively Manufactured 7050 Aluminum Alloy in Chloride Environments

Microstructural Influences Caused by Different Aging Strategies on the Strain-Dependent Damping of the High-Strength Aluminum Alloy AA7075

Revealing the Evolution of Microstructure, Mechanical Property and Corrosion Behavior of 7A46 Aluminum Alloy with Different Ageing Treatment

On the Microstructure, Texture and Electrochemical Properties of Severely deformed and artificially aged Lightweight AA2050 Al-Cu-Li Alloy

Microstructures and Mechanical Properties of Age-Formed 7050 Aluminum Alloy

Achieving superior strength and ductility in 7075 aluminum alloy through the design of multi-gradient nanostructure by ultrasonic surface rolling and aging

Microstructure and mechanical property evolution of additive manufactured eutectic Al-2Fe alloy during solidification and aging

Natural and artificial aging behaviour of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion: Strengthening mechanisms and failure analysis

Effect of aging treatment on microstructure, mechanical and corrosion properties of 7055 aluminum alloy prepared using powder by-product

Aging responses of an Al-Cu alloy fabricated by selective laser melting

Corrosion and Corrosion Protection of Additively Manufactured Aluminium Alloys—A Critical Review

Effect of aging temperature on microstructure and corrosion behavior of 6082 aluminum alloy

Microstructure and Properties of T6I4 Aged 700-MPa-Grade Aluminum Alloy

Experimental study on microstructural evolution, mechanical property, and corrosion behaviour of laser additive manufactured (LAM) titanium alloy grade 5

Strengthening and Toughening Mechanism and Corrosion Resistance of 7003 Aluminum Alloy by Thermomechanical Treatment

Microstructure Evolution and Corrosion Performance of Additively Manufactured GH4099 Superalloy Produced by Selective Laser Melting

Increasing the Mechanical Strength and Corrosion Resistance of Aluminum Alloy 7075 via Hydrostatic Extrusion and Aging