Abstract:The study effectively optimized the transesterification process of Jatropha oil to fatty acid methyl ester using response surface methodology (CCD) and Taguchi orthogonal method, leading to enhanced efficiency and product quality. The optimization of five process parameters was conducted to predict the biodiesel yield (%) from the transesterification of Jatropha oil. The procedure was made easier with the use of a nanocatalyst made from calcium oxide obtained from snail shells using the hydrothermal technique. The RSM approach yielded an optimal FAME of 94.10% under specific conditions: a methanol to oil ratio of 5 : 1, catalyst weight of 1.5 w/w, reaction temperature of 50 °C, reaction duration of 45 minutes, and an agitation speed of 250 rpm across 32 experimental trials. On the other hand, the Taguchi method predicted a higher FAME yield of 86.36% using specific operational parameters. These parameters included a methanol to oil ratio of 4 : 1, catalyst weight of 0.5 w/w, reaction temperature of 60 °C, reaction duration of 25 minutes, and an agitation speed of 200 rpm. These parameters were determined through 16 experimental trials. The RSM technique yielded impressive results with a determined coefficient of determination ( R 2 ) of 0.9943, adjusted R 2 of 0.9838, predicted R 2 of 0.8470, and a coefficient of variance (CV) of 0.65. On the other hand, the Taguchi method had coefficients of 0.8994, 0.7483, and 1.95. The FAME yield of RSM was slightly higher, but the Taguchi method was much more cost-efficient. The analysis of variance (ANOVA) results showed that the methanol to oil ratio had the highest influence on the yield, accounting for 49.61% of the variation. This highlights the significant impact of this factor on the overall process. The study highlights the significance of utilizing advanced techniques such as TOA and RSM, which are known for their effectiveness. The study aims to enhance the yield and efficiency of the transesterification process, thereby increasing the overall production of fatty acid methyl ester from Jatropha oil. This innovative approach efficiently generates biodiesel from renewable resources, like Jatropha oil, in a manner that is both environmentally friendly and maximizes the effectiveness of the process parameters.

Application of rotating cone reactor for continuous biodiesel production: Effect of cone geometry and optimization of operating variables through response surface methodology (RSM)

Optimization Using Response Surface Methodology (RSM) for Biodiesel Synthesis Catalyzed by Radiation-Induced Kenaf Catalyst in Packed-Bed Reactor

Application of Response Surface Methodology (RSM) in the statistical evaluation of biodiesel production from the neutral lipids of the Coelastrella-Nannochloropsis consortium

Response Surface Optimization of Biocatalytic Biodiesel Production with Acid Oil

Response surface optimization of a single-step castor oil-based biodiesel production process using a stator-rotor hydrodynamic cavitation reactor

Design and construction of a single orifice oscillatory flow reactor for the continuous production of biodiesel from sunflower oil

Modeling and optimization of transesterification of Jatropha oil to fatty acid methyl ester: application of response surface methodology (CCD) and Taguchi orthogonal method

Synthesis of the novel catalytic membrane of KOH/ Fe 3 O 4 -graphene oxide/PVDF for the production of biodiesel in a membrane reactor: Optimization with response surface methodology (RSM)

Optimization and synthesis process of biodiesel production from coconut oil using central composite rotatable design of response surface methodology

Optimization of microwave-assisted biodiesel production using response surface methodology

Optimization of biodiesel yield from waste cooking oil and sesame oil using RSM and ANN techniques

Effectiveness of RSM based Central Composite Design for optimization of in-situ biodiesel production process from castor seeds

Production and Optimization of Biodiesel in a Membrane Reactor, Using a Solid Base Catalyst

Box-Behnken Response Surface Methodology for Optimization of Process Parameters for Dairy Washed Milk Scum Biodiesel Production

Optimization of whole cell-catalyzed methanolysis of soybean oil for biodiesel production using response surface methodology

Response Surface Methodology Optimization of Lipase-Catalyzed Transesterification Ofjatropha CurcasL. Seed Oil for Biodiesel Production

Artificial Neural Network and Response Surface Methodology for Predicting and Maximizing Biodiesel Production from Waste Oil with KI/CaO/Al2O3 Catalyst in a Fixed Bed Reactor

Optimization of PB011 Lipase-Catalyzed Synthesis of Biodiesel from Soybean Oil by Response Surface Method

Optimization of biodiesel production from waste cooking oil using α-Fe2O3/HAP catalyst via simultaneous esterification-transesterification reaction

Parameters Optimization of Palm Oil Biodiesel Production at Various CaO Concentrations Using Response Surface Methodology

Lipase-mediated methanolysis of soybean oils for biodiesel production