Multiplexing Power Converters for Cost-Effective and Flexible Soft Open Points

Matthew Deakin

DOI: https://doi.org/10.1109/tsg.2023.3270934

IF: 10.275

2024-01-01

IEEE Transactions on Smart Grid

Abstract:The feasible set of real powers that can be transferred by a three-terminal Soft Open Point (SOP) can be increased by selecting non-uniform power ratings for each of the three ac/dc legs of the SOP, then connecting a multi-terminal switch (multiplexer) to the ac side of each of those converters to facilitate reconfiguration. This paper generalizes this concept, considering the real and reactive power that n multiplexed ac/dc converters can transfer at an m-feeder bus. The performance of the device is studied numerically for a number of ac/dc sizing strategies through the volume of the feasible set of power transfers (the ‘capability chart volume’, CCV) and distribution system loss reduction benefits (as an exemplar network service). Upper bounds on device performance are defined by considering the performance of a novel, idealised SOP consisting of a continuum of infinitesimal reconfigurable converters. Results demonstrate that the CCV can be more than doubled, with 99% of the relative performance improvement of the idealised converter achieved with designs consisting of as few as four converters. SOP equipment costs reductions of 24% are reported, with it concluded that reconfigurable, judiciously sized ac/dc legs can yield flexible and lower cost SOPs than conventional, hard-wired approaches.

engineering, electrical & electronic