Abstract:Conventional epoxy thermosets lack toughness, and conventional methods to toughen them are at the cost of decreasing other properties of the materials, such as the mechanical modulus, strength and transparency. Herein, hydrogenated MQ silicone resins (H-MQ) of various M/Q ratios, where M and Q denote R3SiO1/2 and SiO4/2, respectively, are synthesized from co-hydrolytic condensation of siloxane precursors. Then, these H-MQ resins are bonded with two epoxy monomers, bio-based eugenol glycidyl ether (EG) and allyl glycidyl ether (AG), through hydrosilylation to afford EG-MQ and AG-MQ, respectively, with tailored organic segments and M/Q ratios. The obtained epoxy-functionalized MQ silicone resins will have increased compatibility with the epoxy matrix. Compared with neat DGEBA thermosets, the addition of 20% EG-1.2MQ (M/Q ratio = 1.2 : 1) leads to marked increases in impact, tensile, and flexural strengths by 90%, 3%, and 3%, respectively, as well as increases in tensile and flexural strains by 55% and 100%. The epoxidized organic segments are found to be critical for enhancing the mechanical properties of the obtained epoxy composites. The EG-MQ/epoxy composites show better mechanical properties than AG-MQ/epoxy systems due to the improved compatibility of EG-MQ with DGEBA due to the aromatic EG moieties attached. Furthermore, the thermal stability and residual yield are increased by adding these silicone resins, with an increased water contact angle from 80 to as high as 110 degrees. Our contribution provides a new avenue for integrating such good properties as impact toughness, mechanical properties, thermal stability and water repellance into the obtained epoxy thermosetting materials, without compromising the transparency.

Preparation mtq phenyl type silicone resin containing hydrogen to a reinforced silicone resin mq

The Structure of MQ Rresin and Its Dispersibility in Silicone Oil

Bio-based epoxy functionalized MQ silicone resins: from synthesis to toughened epoxy composites with good mechanical properties, thermal resistance and transparency

A Simple Preparation Route for Bio-Phenol MQ Silicone Resin via the Hydrosilylation Method and its Autonomic Antibacterial Property

Study on preparation and performances of MTQ silicone/fluorinated acrylate polymers

Enhanced Compatibility and Thermo-Oxidative Stability of Silicone Rubber/Ethylene–Propylene Terpolymer Composites Via in Situ Interface Coupling

Synthesis and characterization of high strength and ultraviolet transmitting silicone rubber reinforced by organic solvent‐soluble trimethylsiloxysilicate polymers (MQ and MTQ copolymers)

Synthesis and characterization of ureido-containing MQ silicone resin

Toward Structural Regulation and Characterization of MQ Silicone Resins

Ring-Opening Copolymerization of Mixed Cyclic Monomers: A Facile, Versatile and Structure-Controllable Approach to Preparing Poly(methylphenylsiloxane) with Enhanced Thermal Stability

Preparation of Phenolic Injection Molding Materials with Excellent High Heat Stability of Appearance Characteristics

Synthesis and Characterization of Room Temperature Vulcanized Silicone Rubber Using Methoxyl-Capped MQ Silicone Resin as Self-Reinforced Cross-Linker

The Effect Of The Acid Catalyst On The Preparation Of Mq Silicone Resins

High and Low Temperature Resistance of Phenyl silicone rubber

Preparation and Properties of One Component RTV Silicone Resin Composed of Polysiloxane Block Copolymer

Study on the thermal stability of TPU modified by MQ Resin-Filled Silicone Rubber

Insights into the reinforcement and mechanism of silicone mold rubber co-modified with WCB and MMQ resin

Novel silicone laminating materials for improved index matching in automotive display applications

Preparation and Properties of Solvent Silane Protectant for Marine Construction

Synthesis of High Refractive Index Silicone LED Encapsulation with Ultra-High Hardness

Synthesis and structure evolution of phenolic resin/silicone hybrid composites with improved thermal stability