Abstract:This study investigates AA5083 boron nitride (BN) nanocomposites with varying BN content, produced via powder metallurgy. Emphasizing the impact of BN on microstructure and mechanical properties, the research highlights enhanced compressive strength and homogenous dispersion. Detailed analyses using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and electron backscatter diffraction offer insights into the materials' potential for aerospace, automotive, and marine applications. The as‐received aluminum alloy (AA5083) powders (44 μm) and hexagonal boron nitride (BN) nanoparticles (65–75 nm) are used to fabricate AA5083‐BN nanocomposites with varying BN content (0, 3, 6, 9, and 12 wt%). A powder metallurgy solid‐state method is employed, involving ball milling for 20 h at 100 rpm with a ball‐to‐powder mass ratio of 10:1. The processed powders are then consolidated through forging–sintering at 550 °C for 30 min, followed by hot forging at 225 MPa. The microstructure is examined using X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray, transmission electron microscopy, and electron backscatter diffraction to understand the effect of processing variables. The compaction behavior is investigated both experimentally and empirically, revealing a relative green density exceeding 88% at 500 MPa. The empirical models display coefficients of determination (R2 values) exceeding 99% for predicting the compaction behavior. Compression tests on bulk samples show that BN reinforcement significantly enhances ultimate compressive strength, with values reaching 473.256 ± 5.54, 536.374 ± 2.87, 567.694 ± 4.22, and 601.911 ± 6.54 MPa for TRB‐3, TRB‐6, TRB‐9, and TRB‐12, respectively. The developed composites achieve relative densities greater than 97%, indicating promising applications in the aerospace, automotive, and marine industries.

Nanocrystalline NiTiB reinforced aluminum matrix composites: Synthesis, structural, mechanical and corrosion properties

The Effect of Micron-Sized TiB2 Particles on the Properties of Al6061 Strengthened with 4% TiB2 Nano-TiB2

A Synergetic Effect of Ternary Refractory Nitride Reinforcements on Densification, Mechanical, Tribological and Thermal Stability Characteristics of Spark Plasma Sintering-Developed Ti6Al4V Matrix Composites

Study of the high-temperature mechanical properties of Al-6061/NiTi reinforced metal matrix composites

Effect of AlN on the Mechanical and Electrochemical Properties of Aluminum Metal Matrix Composites

Tribological and Structural Effects of Titanium Carbide and Hexagonal Boron Nitride Reinforcement on Aluminum Matrix Hybrid Composites

Mechanical Performance and Corrosion Behaviour of Aluminum7075 Reinforced by Nano-Titanium dioxide

An Investigation of Microstructural Evolution, Tensile Properties and Work-Hardening Behavior of Nanosized TiB2/Al-Cu-Mn Composites

Fabrication and wear behavior of TiC/TiB 2 -reinforced NiAl intermetallic matrix composites

Investigation of Microstructural, Mechanical and Corrosion Properties of AA7010-TiB2 in-situ Metal Matrix Composite

Cold‐Sprayed Boron‐Nitride‐Nanotube‐Reinforced Aluminum Matrix Composites with Improved Wear Resistance and Radiation Shielding

Nanoindentation and isothermal compression behaviour of Al–4Cu–Ni composites

Effect of Increasing the Strength of Aluminum Matrix Nanocomposites Reinforced with Microadditions of Multiwalled Carbon Nanotubes Coated with TiC Nanoparticles

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

Microstructure and Mechanical Properties of Dual Scaled NbC/Ti2AlC Reinforced Titanium–Aluminum Composite

A Study on the Optimization of Nano-B4C Content for the Best Wear and Corrosion Properties of the Al-Based Hybrid Nanocomposites

Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB2 particles

Mechanical and Microstructure Behavior of AA7050 Metal Matrix Composite Reinforced with TiO2/BN

Microstructural, phase, hardness, and oxidation resistance studies of AlN/h-BN-reinforced Ti6Al4V matrix composites synthesized by spark plasma sintering

Synthesis, Microstructural Investigation, and Mechanical Behavior of AA5083/Boron Nitride Nanocomposite

Study of mechanical properties and wear resistance of nanostructured Al 1100/TiO2 nanocomposite processed by accumulative roll bonding