Abstract:Objective.To present a new set of lithium-ion cross-sections for (i) ionization and excitation processes down to 700 eV, and (ii) charge-exchange processes down to 1 keV u-1. To evaluate the impact of the use of these cross-sections on micro a nano dosimetric quantities in the context of boron neutron capture (BNC) applications/techniques.Approach.The Classical Trajectory Monte Carlo method was used to calculate Li ion charge-exchange cross sections in the energy range of 1 keV u-1to 10 MeV u-1. Partial Li ion charge states ionization and excitation cross-sections were calculated using a detailed charge screening factor. The cross-sections were implemented in Geant4-DNA v10.07 and simulations and verified using TOPAS-nBio by calculating stopping power and continuous slowing down approximation (CSDA) range against data from ICRU and SRIM. Further microdosimetric and nanodosimetric calculations were performed to quantify differences against other simulation approaches for low energy Li ions. These calculations were: lineal energy spectra (yf(y) andyd(y)), frequency mean lineal energyyF-, dose mean lineal energyyD-and ionization cluster size distribution analysis. Microdosimetric calculations were compared against a previous MC study that neglected charge-exchange and excitation processes. Nanodosimetric results were compared against pure ionization scaled cross-sections calculations.Main results.Calculated stopping power differences between ICRU and Geant4-DNA decreased from 33.78% to 6.9%. The CSDA range difference decreased from 621% to 34% when compared against SRIM calculations. Geant4-DNA/TOPAS calculated dose mean lineal energy differed by 128% from the previous Monte Carlo. Ionization cluster size frequency distributions for Li ions differed by 76%-344.11% for 21 keV and 2 MeV respectively. With a decrease in theN1within 9% at 10 keV and agreeing after the 100 keV. With the new set of cross-sections being able to better simulate low energy behaviors of Li ions.Significance.This work shows an increase in detail gained from the use of a more complete set of low energy cross-sections which include charge exchange processes. Significant differences to previous simulation results were found at the microdosimetric and nanodosimetric scales that suggest that Li ions cause less ionizations per path length traveled but with more energy deposits. Microdosimetry results suggest that the BNC's contribution to cellular death may be mainly due to alpha particle production when boron-based drugs are distributed in the cellular membrane and beyond and by Li when it is at the cell cytoplasm regions.

Influence mechanism of lithium surface oxidation on neutron yield of lithium target for accelerator-based neutron source

Depositing a Titanium Coating on the Lithium Neutron Production Target by Magnetron Sputtering Technology

Properties analysis on interlayer within lithium target and its beam uniformity for accelerator-based Boron Neutron Capture Therapy

Preparation and Properties of Chromium Protective Coatings on Lithium Targets for Accelerator-Based Neutron Sources

Neutron yield calculation of p-Li thick target by using PHITS with JENDL-4.0/HE and ENDF/B-VII for BNCT application

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

High-power electron beam tests of a liquid-lithium target and characterization study of (7)Li(p,n) near-threshold neutrons for accelerator-based boron neutron capture therapy

Characterization Of~7li(p,n)~7be Neutron Yields from an Accelerator for Boron Neutron Capture Therapy

Effects of Neutron and Gamma Radiation on Lithium-Ion Batteries

Measurement of Total Neutron Cross Section of Natural Lithium at China Spallation Neutron Source Back-n Facility

Beam Shaping Assembly Design of Li(p,n) Neutron Source with a Rotating Target for Boron Neutron Capture Therapy

A method for delivering the required neutron fluence in an accelerator-based boron neutron capture therapy system employing a lithium target

Synthesis and evaluation of thermal neutron attenuation properties of lithium orthosilicate for its application as a beam shaping material on BNCT facilities

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Simulations on the Thermal and Mechanical Performance of the Rotating Target System of Accelerator-Driven Neutron Source for Boron Neutron Capture Therapy(BNCT)

Optimization design of BNCT neutron source and moderating body based on accelerator 7Li(p, n) reaction

Advancing lithium neutron capture therapy: 6Li-loaded nanoparticles and laser-driven neutron sources

Exploring the Stability of Lithium Metal Surface by X-ray Photoelectron Spectroscopy

The Kinetic Behaviors of H Impurities in the Li/Ta Bilayer: Application for the Accelerator-Based BNCT

Lithium inelastic cross-sections and their impact on micro and nano dosimetry of boron neutron capture

An experimental study of the moderator assembly for a low-energy proton accelerator neutron irradiation facility for BNCT