Abstract:The polymorph of lithium vanadyl phosphate ε-LiVOPO4 is a promising multi-electron intercalation cathode material for Li ion batteries with theoretical capacity of 330 mAh/g. It has been shown to reversibly intercalate and deintercalate Li ions over two redox potentials corresponding to V3+/4+ and V4+/5+ oxidation states. Here we report a low-temperature (LT) hydrothermal synthesis method that produces pure LiVOPO4·2H2O between 120 and 160 oC and pure ε-LiVOPO4 between 180 and 220 oC. We also investigate the structure, electrochemical and thermal properties of the products focusing on ε-LiVOPO4. X-ray diffraction indicates that the lattice parameters of LT ε-LiVOPO4 change linearly with synthesis temperature increase, approaching those reported for high-temperature (HT) synthesized ε-LiVOPO4. Thermogravimetric analysis with mass-spectroscopy (TGA-MS) indicates water loss at 350 °C decreasing from 1.5 to 0.5 wt.% as the synthesis temperature increases from 180 to 220 °C. We have interpreted these observations as an evidence of proton intercalation into the LT ε-LiVOPO4 structure. We have further investigated the process of water loss by in-situ XRD and x-ray absorption spectroscopy (XAS) upon heating, combined with pair-distribution function analysis (PDF) and magnetic measurements of LT ε-LiVOPO4 heated to 350 and 750 °C. In-situ XRD shows abrupt change in the lattice parameters dependences upon temperature at 350 °C. Ex-situ studies indicate that the structure and properties of LT samples heated to 750 °C resemble those synthesized by the solid state method at 750 °C. Interesting reversible change of lattice symmetry upon heating to 550 °C was observed and will be further discussed. LT ε-LiVOPO4 has large particle size, over 10 μm, therefore high-energy ball-milling with carbon is required to bring the particle size to below 1 μm to achieve good electrochemistry. Ball-milled product shows high initial capacity around 300 mAh/g, which holds for about 10 cycles and then gradually decays. The voltage profile of LT ε-LiVOPO4 is sloping upon delithiation, in contrast with the step-like profile of HT ε-LiVOPO4. The detailed distinctions between LT and HT ε-LiVOPO4 leading to variations in the electrochemical performance will be discussed. This work was supported as part of the North East Center for Chemical Energy Storage (NECCES), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012583.

Structure, Composition, and Electrochemistry of Chromium-Substituted ε-LiVOPO 4

The effect of chromium substitution on improving electrochemical performance of low-cost Fe-Mn based Li-rich layered oxide as cathode material for lithium-ion batteries

Electrochemical Performance of Nanosized Disordered LiVOPO4

Hydrothermal Synthesis, Structural Transformations and Electrochemistry of Lithium Vanadyl Phosphates

Effects of Ru doping on the structural stability and electrochemical properties of Li2MoO3 cathode materials for Li-ion batteries

Dimensionally Controlled Lithiation of Chromium Oxide

Probing Reversible Multielectron Transfer and Structure Evolution of Li1.2Cr0.4Mn0.4O2 Cathode Material for Li-Ion Batteries in a Voltage Range of 1.0–4.8 V

Synthesis and Reversible Lithium Storage of Cr2o5 As A New High Energy Density Cathode Material for Rechargeable Lithium Batteries

Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li3PO4 as cathode material for Lithium-ion batteries

Constructing a Cr-Substituted Co-Free Li-Rich Ternary Cathode with a Spinel-Layered Biphase Interface

The capacity fading mechanism of high-capacity CrOx (x ≥ 2.5) cathode material for lithium-ion battery

Metastable Amorphous Chromium-Vanadium Oxide Nanoparticles with Superior Performance As a New Lithium Battery Cathode

Lithium Chromium Oxide Modified Spinel LiCrTiO4 with Improved Electrochemical Properties

Role of Cr3+/Cr6+ redox in chromium-substituted Li2MnO3 center dot LiNi1/2Mn1/2O2 layered composite cathodes: electrochemistry and voltage fade

Synthesis and Electrochemical Performance of LiVO3 Cathode Materials for Lithium Ion Batteries

Manipulation of Transition Metal Migration via Cr-Doping for Better-Performance Li-Rich, Co-Free Cathodes

Synthesis and In-Situ Investigation of Olivine LiMnPO4 Composites Substituted with Tetravalent Vanadium in High-Rate Li-Ion Batteries

Enhanced electrochemical performance of LiVPO4F/C composite with in-situ generated Li3V2(PO4)3 for lithium-ion batteries

Synthesis and Electrochemical Performance of 0.6li3v2(po4)3·0.4li–v–o Composite Cathode Material for Lithium Ion Batteries

Communication—Cubic Lithium Chromium Oxide (lixcr2o5) As a New Cathode Material for Lithium Ion Batteries

Ssnmr Studies of Li3V2(PO4)3/C Cathode Reactions: Structural Evolution, Dynamics and LVP-Carbon Interface