Abstract:As a simple and efficient heat transfer device, the pulsating heat pipe (PHP) has been considered as one of the most effective methods to meet the challenges of high heat flux. Current studies focused on the heat transfer performance of the PHP with a small diameter (d <= 3 mm). However, the PHP with a relatively large diameter has better performance due to the larger heat capacity of the working fluid at the same filling ratio. Besides, compared with the PHP with circular channels, the PHP with rectangular channels has special advantages due to the unique structures. On the basis of this, an experimental setup of the PHP with rectangular channels of 4 mm equivalent inner diameter was built, and the influence of cross-section shape on the start-up characteristics and heat transfer performance of the PHP was investigated. The experimental results showed that the start-up process shifted from a "sudden start-up mode" to a "smooth start-up mode" with the increase of heating power. The start-up heating power of the PHP with rectangular channels was (1.5-2) times greater as the heating power of the PHP with circular channels. Furthermore, the thermal resistance of the PHP with rectangular channels was only (30-40)% of the PHP with circular channels, and the temperature differences between the evaporation section and the condensation section were (10-20) degrees C lower than those of the PHP with circular channels under the same filling ratio and heat flux. It could also be concluded from the results that the lowest thermal resistance was achieved when filling ratio was 0.3 within the range of experimental data. The experimental results will provide valuable references for the optimal design of the PHP and further studies. (C) 2017 Elsevier Ltd. All rights reserved.

Visualized Investigation of a Nitrogen Pulsating Heat Pipe

Visualization Study on the Flow Characteristics of a Nitrogen Pulsating Heat Pipe

Experimental Study on the Thermo-Hydrodynamic Characteristics of a Nitrogen Pulsating Heat Pipe

Numerical Investigation on Pulsating Heat Pipes with Nitrogen or Hydrogen

Experimental Research on Heat Transfer Performance of 3 mm Closed Pulsating Heat Pipe

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Partial Visualization Study on Flow, Startup and Heat Transfer Characteristics of Closed-Loop Pulsating Heat Pipe with R1336mzz(Z)

Thermo-hydrodynamic Analysis of a Nitrogen Flat-Plate Pulsating Heat Pipe Using CFD Modeling and Visualization Experiments

Investigation on the Influence of Different Heat Transmission Distances on Thermo-Hydrodynamic Characteristics of Pulsating Heat Pipes

Numerical investigation on cryogenic pulsating heat pipes with nitrogen

Numerical Study of the Thermal Performance of a Hydrogen Pulsating Heat Pipe

Experimental investigation on heat transfer performance of closed-loop pulsating heat pipe with large inner diameter

Transient Numerical Model on the Design Optimization of the Adiabatic Section Length for the Pulsating Heat Pipe

Experimental Research on the Start-Up Characteristics and Heat Transfer Performance of Pulsating Heat Pipes with Rectangular Channels

Experimental Study on a Hydrogen Closed-Loop Pulsating Heat Pipe with Two Turns

Performance of a Vertical Closed Pulsating Heat Pipe with Hydroxylated MWNTs Nanofluid

Experimental Study on a Hydrogen Closed Loop Pulsating Heat Pipe with Different Adiabatic Lengths

Review of the Development of Pulsating Heat Pipe for Heat Dissipation

A Tracking Algorithm of Vapor-Liquid Interfaces for Pulsating Heat Pipe: Theoretical and Experimental Validation at Liquid Nitrogen Temperature

Experimental Investigation of the Influence of Surfactant on the Heat Transfer Performance of Pulsating Heat Pipe

Recent advances in visualization of pulsating heat pipes: A review