Abstract:As emerging and revolutionary alloy materials, high entropy alloys (HEAs) have been extensively studied because of their unique composition, microstructures and excellent mechanical properties and performances. However, there have been limited studies on the deformation behaviors and mechanisms of HEA single crystals at the micro/nanoscale. Here, we fabricated single-crystalline CoCrFeNi HEA pillars with typical orientations of <100>, <110> and <111> and diameters ranging from 272 nm to 1,253 nm and then conducted in situ uniaxial compression tests on these fabricated micro/nanopillars inside a scanning electron microscope. The in situ compression tests showed pronounced size effects on yield and flow stresses in the <100>-, <110>- and <111>-oriented micro/nanopillars, i.e., both yield and flow stresses follow a scaling law with pillar diameter. The scaling exponents of <110>- and <111>-oriented micro/nanopillars are approximately -0.60, which is close to those of face-centered-cubic (FCC) pure metallic micro/nanopillars. However, the <100>-oriented pillars, having a scaling exponent of -0.32∼-0.17, exhibit weaker size effects on yield and flow stresses compared with the <110>- and <111>-oriented micro/nanopillars. Combining observations and analyses using transmission electron microscopy, and large-scale atomistic simulations, we revealed that the nucleation and slip of full dislocations dominate the plastic deformation in the <110>- and <111>-oriented micro/nanopillars, while deformation twinning is a governing mechanism in the <100>-oriented micro/nanopillars. These underlying deformation mechanisms are responsible for the size effects of single-crystalline HEA micro/nanopillars. Large-scale atomistic simulations further reveal that twin nucleation in <100>-oriented pillars is initiated by the slip of pre-existing partial dislocations from an internal source. By considering the free energy change during partial slip, we used a theoretical model to predict the scaling law for the size effects of <100>-oriented micro/nanopillars. The predicted scaling exponent for the size effect of <100>-oriented micro/nanopillars is consistent with our experimental results. Our current study sheds light on the underlying deformation mechanisms in FCC HEA single crystals at the micro/nanoscale, which provides a guide for the design and fabrication of HEAs with high strength and remarkable plasticity.

Rediscovering the intrinsic mechanical properties of bulk nanocrystalline indium arsenide

Atomistic Investigations of Single-Crystal Silicon with Pre-Existing Defects

Unraveling the Hall-Petch to Inverse Hall-Petch Transition in Nanocrystalline CdTe

Investigation of the Evolution of Plastic Anisotropy and Pile-up of Al Single Crystal in Nanoindentation Using Different Crystal Plasticity Models

Delay of inverse Hall-Petch relationship of nanocrystalline Cu by modifying grain boundaries with coherent twins

Uncovering Nanoindention Behavior of Amorphous/Crystalline High-Entropy-Alloy Composites

Complex strengthening mechanisms in nanocrystalline Ni-Mo alloys revealed by a machine-learning interatomic potential

On the crystallographic anisotropy of plastic zone size in single crystalline copper under Berkovich nanoindentation

Unveiling orientation dependence of anisotropic plasticity in polycrystalline copper by nanoindentation

Mechanical properties of crystalline-amorphous composites: generalisation of Hall-Petch and inverse Hall-Petch behaviours

Mobile dislocation mediated Hall-Petch and inverse Hall-Petch behaviors in nanocrystalline Al-doped boron carbide

Size effects and plastic deformation mechanisms in single-crystalline CoCrFeNi micro/nanopillars

Unraveling the Hall-Petch to Inverse Hall-Petch Transition in Nanocrystalline High Entropy Alloys under Shock Loading

Probing the Crystal Structure and Dislocation Evolution in Single Crystal Al0.3CoCrFeNi High-Entropy Alloy under Nanoindentation

Review of indentation size effect in crystalline materials: Progress, challenges and opportunities

Depth-sensing ductile and brittle deformation in 3C-SiC under Berkovich nanoindentation

Effect of the structure and volume fraction of nanophase on the mechanical properties of (FeNi)86B14 amorphous nanocrystalline alloys

An Inverse Hall-Petch Behavior and Improving Toughness in Translucent Nanocrystalline High-entropy Zirconate Ceramic

Atomistic simulation of nanoindentation response of dual-phase nanocrystalline CoCrFeMnNi high-entropy alloy

Two-phase model for inverse Hall–Petch effect in nanocrystalline thin film: Atomistic simulation study

Chemical short range order and deformation mechanism of a refractory high entropy alloy HfNbTaZr under nanoindentation: An atomistic study