Abstract:A one-dimensional model, LOGEcat is used to develop a detailed surface reaction mechanism for modeling the steam reforming of methane over a nickel-based catalyst. The focus of the paper is to develop a kinetically consistent surface reaction mechanism. The two terms, kinetically and thermodynamically consistent mechanisms, will be used frequently in this article. Note that when the mechanism is thermodynamically consistent then the thermodynamic data or the thermochemistry of the species is not used and all the reactions in the mechanism are forward reactions (no backward reactions included) which need the Arrhenius parameters (pre-exponential factor, ; activation energy, ; temperature exponent, ) explicitly for each reaction. The kinetically consistent mechanisms need Arrhenius parameters only for the forward reactions and does not need these parameters for backward reactions making the backward reactions independent of the kinetics. The rate for the backward reactions is calculated with the help of thermochemistry of the intermediate species involved in the reaction mechanism. Since the thermochemistry of the intermediate species are not easily available, this makes such studies much more complex. The original multi-step reaction mechanism consists of 42 reactions which are thermodynamically consistent. In this study we have modified this reaction mechanism from literature and used only 21 (reversible) direct reactions. This aspect is important because by using only 21 reactions, we use the thermochemistry of the species to achieve thermodynamic equilibrium instead of providing the Arrhenius parameters for forward and backward reactions. We use the same , and values as used in the reference paper for the considered 21 reactions which are in equilibrium. However, the value of , and for the inverse/backward reactions are not given in the mechanism and the reverse rates are calculated by using the equilibrium and forward rate. Therefore, a sensitivity analysis on thermochemistry of the species is performed for a better agreement with the literature data. The method is presented for ensuring kinetic consistency and bringing thermochemistry of species in play while developing a surface reaction mechanism. The applicability of the mechanism is tested for two different simulation set-ups available in literature considering various reactor conditions in terms of parameters given as temperature and steam-to-carbon (S/C) ratio. Several chemical reaction terms, such as, selectivity, conversion and ratio are shown for different parameters in comparison with the available reference data. The detailed mechanism developed in this study is able to accurately express the steam reforming of methane over the nickel catalyst for complete ranges of temperature for both the set-ups and within acceptable limit for S/C ratio considered for the analysis.

Kinetics of the steam reforming of methane with iron, nickel, and iron-nickel alloys as catalysts

The Intrinsic Kinetics of Methane Steam Reforming over a Nickel-Based Catalyst in a Micro Fluidized Bed Reaction System

Thermodynamic assessment of the stability of bulk and nanoparticulate cobalt and nickel during dry and steam reforming of methane

Methane dry reforming over nickel-based catalysts: insight into the support effect and reaction kinetics

Kinetically consistent detailed surface reaction mechanism for steam reforming of methane over nickel catalyst

Thermodynamic model: steam and oxidative reforming of methane over nickel catalyst

Kinetic Analysis of Rate Data for Dry Reforming of Methane

Partial oxidation of methane on a nickel catalyst: Kinetic Monte-Carlo simulation study

Dry reforming of methane with a Ni-based catalyst: a kinetic and thermodynamic analysis

DFT studies of dry reforming of methane on Ni catalyst

Steam reforming of methane over nickel catalyst using a one-dimensional model

Influences Of Reaction Conditions On Steam Reforming Of Methane Over Ni/Zro2 Catalyst.

A Comparative Study of Catalytic Behaviors of Mn, Fe, Co, Ni, Cu and Zn–Based Catalysts in Steam Reforming of Methanol, Acetic Acid and Acetone

Metastable nickel–oxygen species modulate rate oscillations during dry reforming of methane

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Reaction Pathway for Coke-Free Methane Steam Reforming on a Ni/CeO2 Catalyst: Active Sites and the Role of Metal-Support Interactions

A Study on CO2 Methanation and Steam Methane Reforming over Commercial Ni/Calcium Aluminate Catalysts

Inhibition of methane formation in steam reforming reactions through modification of Ni catalyst and the reactants

Role of Fe Species of Ni-Based Catalysts for Efficient Low-Temperature Ethanol Steam Reforming

Hydrogenation of CO to methane over mesoporous nickel-iron-alumina xerogel nano-catalysts